Sosmetal Products, Inc. 2026 Product Catalog

FASTENERS & HARDWARE

SOSMETAL PRODUCTS INC.

MASONRY ANCHORS

ZAMAC NAILIN

Use in concrete, block, brick or stone.

l Body is made of Zinc (Zamac #7) with plated steel nail to resist corrosion. l Tamperproof. l One piece assembly. l No layout or hole-spotting required. l GSA Specification, FF-S-325, Group V, Type 2, Class 3. l Mushroom Head.

(PSS122618)

SIZE

PART DRILL SIZE EMBED. DEPTH

(INCHES)

NUMBER (INCHES)

(INCHES)

QTY

1/4 x 1-1/4 1/4 x 1-1/2 1/4 x 2

1/4 1/4 1/4

1-1/8 1-3/8 1-7/8

314101 314102 314103

50 50 50

TAPCON ® FASTENERS The only masonry anchor that cuts into concrete, brick and cement block.

l Blue Stalgard coating for rust protection. l Replaces expansion anchors, powder actuated fasteners, plugs and screws.

l Exceptional pull-out strength - as strong or stronger than any anchor its size. l Two step operation: drill hole and drive the anchor; save time and money.

l Tapcon‚ anchors are reversible - easily removed to adjust for shimming or leveling.

PART

PART

NUMBER

NUMBER

SIZE

DRILL SIZE

USE

SLOTTED HEX QTY PHILLIPS FLAT QTY

(INCHES)

(INCHES) DRILL NO.*

25 3/16 x 1-1/4 5/32 x 3-1/2 507375 25 3/16 x 1-3/4 5/32 x 3-1/2 507375 25 3/16 x 2-1/4 5/32 x 4-1/2 507376 25 3/16 x 2-3/4 5/32 x 4-1/2 507376 25 3/16 x 3-1/4 5/32 x 5-1/2 507377 25 3/16 x 3-3/4 5/32 x 5-1/2 507377 1/4 x 1-1/4 3/16 x 3-1/2 507344 1/4 x 1-3/4 3/16 x 3-1/2 507344 1/4 x 2-1/4 3/16 x 4-1/2 507345 1/4 x 2-3/4 3/16 x 4-1/2 507345 1/4 x 3-1/4 3/16 x 5-1/2 507348 1/4 x 3-3/4 3/16 x 5-1/2 507348 3/16 x 4 5/32 x 5-1/2 507377

507356 507357 507358 507359 507360 507361 507362 507336 507337 507338 507339 507371 507354 507355

507363 507364 507365 507366 507367 507368 507369 507340 507341 507342 507343 507372 507373 507374

25 25 25 25 25 25 25 25 25 25 25 25 25 25

SLOTTED HEX

PHILLIPS FLAT

TAPCON ® ANCHORS SUPERIOR DESIGN HEAD - Slotted hex waher head and Phillips flat head styles available. THREADS - Specially notched high-low design taps threads into concrete. High threads cut deeply, easily into masonry. Low threads provide stability as anchor is driven. POINT - Guides the anchor directly into the pre-drilled hole. The nail design allows the fastener to drill into wood.

25 25 25 25 25 25 25 25

1/4 x 4

3/16 x 5-1/2 507348

*NOTE: To use Tapcon fasteners, you must pre-drill hole with special carbide tipped masonry drills listed above.

ASSORTMENTS AVAILABLE!

2 Step Installation Tool Kit Part No. 507346 Drill the hole and drive

the anchor with the same tool.

Master Assortment w/ Tools Part No. 501581 199 pieces • 14 items 12051 steel tray Includes drills, screws and installation kit.

Master Assortment Part No. 501580 230 pieces • 10 items 12051 steel tray

507336 507337

507338 507339

507340 507341

507342 507343

507354 507355

507336 507337 507338

507339 507340 507341

507342 507343 507344

507345 507346 507348

507354 507355

Numbers in assortment

Numbers in assortment

A21 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10

A21-6 REVISED FEBRUARY, 2019

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.