2026 Industrial MRO Catalog

TOOLS & SHOP SUPPLIES

THREAD REPAIR TOOLS and EXTRACTORS

INTERNAL THREAD RESTORERS • Quickly adjusts to any thread diameter and pitch within the size range of the tool. • A major advantage over taps is the ability to enter below the first damaged grooves, often at the bottom of the thread, and work in a outward direction. • Applicable to all kinds of thread: inch, metric right-hand or left-hand, fine or coarse. • The blade, made of high speed steel (62RC), is guided by the existing undamaged thread to regroove the damaged section.

PSS111116. 813374-77.83

Replaces Many Taps

TYPICAL EXAMPLES OF USE:

PART

ADJUSTMENT I.D. RANGE

NUMBER 813374 813375 813376 813377

INCH

MM

PIPES BSP/NPT

5/16 - 7/16 1/2 - 5/8 11/16 - 13/16 7/8 - 1-1/4

8mm - 11mm 12mm - 16mm 16mm - 20mm 22mm - 32mm

1/16 - 3/16 1/4 - 3/8 3/8 - 1/2 1/2 - 7/8

Fastener Internal Thread Repair Kit Diameter range: between 5/16"- 13/16" (8 mm - 20 mm) for Automotive and Industrial. Part No. 813383

Attachable sleeve

Removable knob

SUPER OUT Bolt and Screw Extractors • Made of a special, hardened, shock-resistant tool steel. • Works on both left and right hand threads. • Cuts straight into bolts, eliminating wedging. • Five sizes remove 1/4” to 5/8” bolts and screws. Part No. 113224 5 piece set, packed in a protective case

D14 D13 D10C D11

SUPREME EXTRACTORS Double edge engagement with the fastener for a non-slip grip • Saves expensive components

• Universal - remove right or left handed thread. • May be used clockwise or counter clockwise. • Unique tapered flute style. • Hex drive shaft - easily attaches to an adjustable, box or socket wrench for added torque. • 4 cutting facets - each facet has a double edge. • Won’t damage threads.

• Special tempered CrV steel with a hardened center punch for increased drilling accuracy. • Damaged free removal of broken screws & bolts.

PART SIZE DESCRIPTION A/F DRILL DIA.

SCREW SIZES

NUMBER

INCH INCH

INCH MIN MAX MIN MAX

213751 1 Screw Extractor 213752 2 Screw Extractor 213753 3 Screw Extractor 213754 4 Screw Extractor 213755 5 Screw Extractor

1/4 1/8 3/16 3/16 1/4 3/8 3/16 9/32 5/16 3/8 1/2 1/4 3/8 7/16 1/2 5/8 11/32 1/2 1/2 9/16 3/4 7/16 5/8 5/8 3/4

Part No. 213750 (shown here)

SMP100412

213750 1-5 Screw extractor 5 pc. set in vinyl pouch

INSTRUCTIONS

• Choose the proper size by placing it over the damaged bolt or stripped screw. • Hit with a hammer to engage the center punch. • Using a drill, make a small hole. • When finished, reseat the Supreme Extractor over the damaged component. • Now you are ready to remove the damaged bolt or screw. • If added torque is necessary, attach a wrench to back out the screw.

Setting the extractor with a tap wrench

BROKEN BOLT REMOVER COMBO - TYPE 420-AL Left hand drill combined with spiral style screw extractor is ideal for removing broken studs.

SCREW & PIPE EXTRACTORS HI-CARBON STEEL - SPIRAL STYLE To remove the broken threaded part: drill a hole in the end of the broken part (left hand spiral heavy duty drills are recommended for this drilling operation), insert extractor, then turn counterclockwise using a wrench on the exposed end of the extractor.

PART

SCREW & PIPE EXTRACTORS

NUMBER TYPE DESCRIPTION 213761 420 & 190-AL 10 pc. set w/drills EX-1, 2, 3, 4 & 5 + 3/32, 1/8, 3/16, 1/4 & 5/16 213762 420 4 pc. set EX-2, 3, 4 & 5 213763 420 5 pc. set EX-1, 2, 3, 4 & 5 213764 420 & 190-AL 8 pc. set w/drills EX-1, 2, 3 & 4 + 3/32, 1/8, 3/16 & 1/4

(Carded)

PART EXTRACTOR NUMBER SIZE

DRILL SIZE 3/32 LH drill 1/8 LH drill 3/16 LH drill 1/4 LH drill 5/16 LH drill

EX-1 EX-2 EX-3 EX-4 EX-5

213756 213757 213758 213759 213760

PSS040417

PSS040417

D10C-32 REVISED JANUARY, 2018

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.