2026 Industrial MRO Catalog

TOOLS & SHOP SUPPLIES EXTRACTORS

X-OUT TM Damaged Screw Remover Industrial Series When a screwdriver can’t remove the screw, use X-OUT ™

PSS111016.213174

Have you damaged or rounded off the head of a screw when inserting or removing them? X-Out™ is designed to remove such a problem screw. It plows onto the head of the screw and turns the screw out with the power of the hand drill.

• Constructed of M-2 high quality tool steel. • Remove damaged screws fast & easy. • Time savings - no hole drilling required.

• Save money on unnecessary repair. • Used on Phillips, Slotted, Torx, Robinson, Oneway screws, etc. • Removes screw sizes #6 thru #14.

• Reusable time and time again. • Chemical and gunk free.

D11 D10C D13 D14

Part No. 213714 3 bit set with case

COMPATIBLE WITH QUICK CONNECT CHUCK SYSTEMS.

SUGGESTED APPLICATION: l Chuck the X-Out™ into standard 3/8 inch variable speed power drill, set for reverse mode. For faster results use a standard 1/4” quick bit holder (not provided). l Place the tip of the X-Out™ onto the center of the damaged fastener. Apply firm pressure in the direction of the damaged screw or fastener. Power the drill to the lowest level possible. Maintain a firm pressure towards the screw or fastener. The screw will begin to turn out.

proGRABIT ® Broken Bolt & Damaged Screw Remover Industrial Series

ProGrabit is a drill and extractor in one tool that removes screws or bolts with any type of damaged head, from any material. No more guesswork in matching drill size with extractor, as with manual tools. ProGrabit’s quick connect chuck capability increases its ease of use. Simply drill, then flip and extract.

PSS111016.213707

• Serrated edges bite into damaged screws without slipping. • Drills into Grade 8 or 10.9 class bolts. • Self-centering, tip prevents “walking” or “wandering”. • Overcomes even rusted screws, free spinning screws and screws up to 4” long.

Part No. 213707 4 bit set with case

TYPICAL APPLICATIONS l Automotive l Home building/remodeling/restoration l Furniture restoration l General maintenance l Small engine repair

DRILL-OUT ® POWER EXTRACTORS Industrial Series

PSS110916.213604.705

A unique removal tool that is a drill and extractor in one!

• Removes broken bolts, screws and studs in a fraction of the time. • Left hand drill bit* often loosens bolts while drilling.

• Self-centering drill point for fast accurate drilling. • Efficient design making it fast, reliable and reusable. • Heat treated high-speed steel drills Grade 8 fasteners.

DRILL-OUT ® Micro Power Extractor

DRILL-OUT ® Power Extractor

EASY TIME SAVING OPERATION!

Use on small size fasteners, often found in electrical and aviation applications, and motorcycle repair.

Use on common size fasteners, up to and including Grade 8, Class 10.9 steel and stainless steel.

Removes 1/4”, 5/16”, 3/8” and 1/2” sizes and 6mm, 8mm, 10mm and 12mm sizes.

Removes #5, #6, #8, #10, #12, and 1/4” sizes and 3mm, 4mm, 5mm and 6mm sizes.

Part No. 213705 4 piece set with case

Part No. 213604 4 piece set with case

* Designed to be used in a variable speed drill, set in reverse.

D10C-33 REVISED MARCH, 2016

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.