2026 Industrial MRO Catalog

TOOLS & SHOP SUPPLIES

THREAD REPAIR TOOLS

BOLT CLEANING TOOL

UNIVERSAL THREAD REPAIR COMBINATION INTERNAL/EXTERNAL

A fast, easy and safe way to clean bolts for reuse and quick installation. • The tool may be hand held or vice mounted. Mount the tool handle in a vise or firmly hold in one hand. • Determine the size of the bolt to be cleaned and insert it in the proper hole size. • Turn the bolt using a wrench, ratchet or power tool until all the threads have passed through the tool, then reverse to remove, do this up to two times. • The bolt comes out clean, free of grime, grit, surface rust, threaded tape or any foreign material. • Eliminates the need for solvents, wire brushes, wire wheel bench grinders.

Ideal for maintaining plumbing, construction, agriculture, car repair and many other applications where components have damaged threads. Compare the cost of disassembling the part in order to repair a component, with the instant repair performed by these thread restorers.

D11 D10C D13 D14

• Automatically adjust to any thread diameter & pitch. • No prior measurement of threads. • Use on left or right handed threads. • Use on both inch and metric.

BEFORE AFTER

PART CONTENTS HEAVY DUTY SET NUMBER METRIC FRACTIONAL 813390 3 pc set (1) External 4 - 19mm 5/32” - 3/4” (2) Internal 8 - 16mm 5/16” - 5/8” PSS052212.813390

SAE Part No. 113285 Sizes: #10, #12, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16 RED HANDLE METRIC Part No. 113286 Sizes: 5, 6, 7, 8, 9, 10, 12, 14mm BLUE HANDLE

EXTRACTOR TOOLS

5 assorted screw extractors for removing screw or bolt sizes 3/16” to 3/4”. Each extractor is permanently marked with suggested drill size.

NOTE: The BOLT CLEANING TOOL cannot fix damaged, stripped, and/or pitted threads and cannot make new threads.

Part No. 11375

PSS080120

OIL DRAIN PAN RETHREADING KIT Actual “cutting” taps for drain pan repair.

MASTER RETHREADING SET

• Repairs fractional or metric threads. • Taps and dies are hex-shaped for use with a socket or wrench. • Rethreading tools are color coded for quick, visual identification.

PART NUMBER 813848 813962 813963 813964 813966 813967

SIZE

40 piece set contains: 7 NC Coarse Die sizes, 7 NF Fine Die sizes,

Part No. 323420 6 pieces • 6 items 12028 plastic tray

1/2”-20 SAE 12mm x 1.25 12mm x 1.50 12mm x 1.75 14mm x 1.25 14mm x 1.50

6 Metric Die sizes, 6 NC Tap sizes, 6 NF Tap sizes, 6 Metric Tap sizes, one SAE (8 sizes) and one metric (8 sizes) rethreader file.

Numbers in assortment 813848 813962 813963 813964

813966 813967

Part No. 813221

EXTERNAL BOLT RETHREADING TOOL

• Quickly adjusts to any diameter. • Blades automatically adapt to any thread pitch. • Will adjust themselves into the thread grooves. • Can be used on L/H or R/H threads.

• Can be used on metric/standard threads. • Use in truck & tractor garages • Industrial maintenance in all industries, energy industries, shipyard, marine and offshore users.

TYPICAL EXAMPLES OF USE:

Replaces Many Dies

PART

ADJUSTMENT

NUMBER 813785 813758

MINIMUM MAXIMUM

5/32” - 3/4” 11/16” - 1-1/2”

4mm - 19mm 17mm - 38mm

PSS110717.813755-58.85.813386

KITS AVAILABLE

2PC External Bolt Rethreading Tool Kit Diameter range: between 5/32"- 1-1/2" (4 mm - 38 mm) for Automotive and Industrial. Part No. 813755

8PC External Bolt Rethreading Tool Kit Diameter range: between 5/32"- 6" (4 mm - 152 mm) for Automotive and Industrial. Part No. 813386

813386 shown here

D10C-31 REVISED AUGUST, 2020

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.