2026 Industrial MRO Catalog

TOOLS & SHOP SUPPLIES

ULTRA-CUT TAPS, SPECIAL TAPS, DIES, TOOLS and TAP & DIE SETS

COMBINATION DRILL-TAP

High speed steel drills and taps in one operation. • Eliminates loose, sloppy holes because wrong size drill was used. • Reduced shank minimizes breakage due to overrun. • Only 1 setup required. • Provides precision tapped holes in one - 2 stage process.

THREAD

PART

DRILL SIZE

THREAD OVERALL LENGTH LENGTH

SIZE

NUMBER

MM 2.7 3.5 3.9 3.9 4.5 5.1 6.5 8.0 9.2

MM

MM

6-32* 8-32 10-24 10-32 12-24 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13

12 12 15 15 16 18 21 22 25 29

51 64 72 72 77 83 94

814425 814426 814427 814428 814429 814430 814431 814432 814433 814434

Part No. 814435 6 pieces • 6 items 12048 plastic tray

Part No. 814436 5 pieces • 5 items 12048 plastic tray

104 107 114

Numbers in assortment 814425 814426 814428 814430

814431 814432

Numbers in assortment 814430 814431 814432 814433

814434

10.8

* Not a reduced shank

PIPE THREAD TAPS

Ground Threads • Carbon Tool Steel

PART

TAP SIZE NPT

USE

PART

TAP SIZE NPT

USE

• Cuts internal threads in pipes. • Ideal where extremely tight fit is required. • Drill size permanently marked on each tap.

NUMBER 813701 813702 813703

INCHES DRILL SIZE NUMBER

INCHES

DRILL SIZE

1/8-27 1/4-18 3/8-18

11/32 7/16 37/64

1/2-14 3/4-14

23/32 59/64 1-5/32

813704 813705 813706

1” - 11-1/2

TAP AND REAMER WRENCHES

DIE STOCK

D14 D13 D10C D11 • Professional quality. • Rugged, long lasting construction. • Hardened and heat treated steel jaws. • Adjusts easily by turning handles.

• Professional quality. • Chrome steel handles. • 3-jaw self centering adjustable guides. • Assures straight threads and easy handles.

PART

FOR TAP SIZE

PART

FOR DIES INCHES

NUMBER INCHES 813135 No. 4 m/s - 1/2 813136 1/4 - 3/4 813137 1/2 - 1-1/8

NUMBER 813134

1-1/2 Round & 1-7/16 Hex O.D.

TAP SOCKET SET • Ideal for use in areas where a T-handle won’t fit. • Set of 8 sockets fits all number and fractional standard taps thru 1/2”. • Also fits 1/8” NPT taps and metric taps thru 12mm.

Part No. 213653

TAP & DIE SETS

• Hardened and tempered to cut smooth threads.

• Made of tough tool steel, hard chrome finish.

24 PIECE MECHANIC SETS

40 PIECE MECHANIC SETS

KIT CONTAINS:

KIT CONTAINS:

Fractional Plug Tap and 1" Hexagon Dies in sizes: 1/4" - 20 NC, 1/4" - 28 NF, 5/16" - 18 NC, 5/16" - 24 NF, 3/8" - 16 NC, 3/8" - 24 NF, 7/16" - 14 NC, 7/16" - 20 NF, 1/2" - 13 NC, 1/2" - 20 NF Pipe Thread Plug Tap and

1 Die Stock for 1” round or hex 1 Tap Wrench for 4MS-1/2”

1 T-Handle Tap Wrench for No. 0 - 1/4” 1 T-Handle Tap Wrench for 1/4” - 1/2”

1" Hexagon Dies in sizes: 1/8" - 27 NPT Threading Tools: Plain Die Stock - 1" Dies, Offset Adj. Tap Wrench No. 0 to 1/2"

1 Screw Pitch Gauge for 9 to 40 U.S. (fractional set) 1 Metric Thread Gauge for 0.45 to 2.50mm (metric set) 1 Screwdriver - No.5

FRACTIONAL SET Part No. 813031 17 taps • 17 one inch hex dies

FRACTIONAL SET Part No. 813030 11 taps • 11 one inch hex dies

METRIC SET Part No. 813036 17 taps • 17 one inch hex dies

METRIC SET Part No. 813035 11 taps • 11 one inch hex dies

THREAD

SIZE AND THREADS PER INCH

NC NC NF

4-40

6-32 3/8-16 1/4-28

8-32

10-24 1/2-13 3/8-24

12-24

1/4-20 1/2-20

THREAD

SIZE AND THREADS PER INCH

NC NF NPT

5/16-18 10-32 1/8-27

7/16-14 5/16-24

1/4-20 1/4-28 1/8-27

5/16-18 5/16-24

3/8-16 3/8-24

7/16-14 7/16-20

1/2-13 1/2-20

7/16-20

NPT

SIZE AND PITCH

SIZE AND PITCH

3mm-.50 4mm-.70 5mm-.80

6mm-1.00 7mm-1.00 8mm-1.25

9mm-1.25 10mm-1.50 12mm-1.50

12mm-1.75 1/8-28 BSP

3mm-.60 3mm-.60 4mm-.70 4mm-.75

5mm-.80 5mm-.90 6mm-1.00 7mm-1.00

8mm-1.25 9mm-1.00 9mm-1.25

10mm-1.25 10mm-1.50 11mm-1.50

12mm-1.50 12mm-1.75 1/8-28 BSP

D10C-30 REVISED SEPTEMBER, 2019

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.