Sosmetal Products, Inc. 2026 Product Catalog

SOSMETAL PRODUCTS INC.

ELECTRICAL FASTENERS

MULTILINK TERMINALS

MULTILINK TERMINAL ASSORTMENT

E10 E11 E12 E13 E14 E15

• Includes ring, spade, butt and quick disconnects in wire sizes 20 through 10 AWG.

MULTILINK TERMINAL ASSORTMENT 209400

Wire Range: 16-14 Size: 1/4” Type: Ring Tongue 209413

Wire Range: 12-10 Size: 3/8” Type: Ring Tongue 209430

Wire Range: 20-18 Size: 1/4” Type: Ring Tongue 209381

MECHANICS ASSORTMENT

Wire Range: 20-18 Size: .250 Blade Type: Female Disconnect 209391

Wire Range: 16-14 Size: 10 Type: Ring Tongue 209412

Wire Range: 20-18 Size: 10 Type: Ring Tongue 209380

Wire Range: 16-14 Size: .250 Blade Type: Female Disconnect 209423

Wire Range: 12-10 Size: 1/4” Type: Ring Tongue 209428

Wire Range: 12-10 Size: .250 Blade Type: Female Disconnect 209439

Part No. 209400 136 pieces • 21 items • 12045 plastic tray

209375 209376 209377 209378 209379

209380 209381 209390 209391 209410

209411 209412 209413 209422 209423

209426 209427 209428 209430 209438

209439

Wire Range: 16-14 Size: 8 Type: Ring Tongue 209411

Wire Range: 20-18 Size: 8 Type: Ring Tongue 209379

Wire Range: 20-18 Size: .250 Tab Type: Male Disconnect 209390

Wire Range: 16-14 Size: .250 Tab Type: Male Disconnect 209422

Wire Range: 12-10 Size: 10 Type: Ring Tongue 209427

Wire Range: 12-10 Size: .250 Tab Type: Male Disconnect 209438

Wire Range: 16-14 Size: 6 Type: Ring Tongue 209410

Wire Range: 20-18 Size: 6 Type: Ring Tongue 209378

Wire Range: 12-10 Size: 8 Type: Ring Tongue 209426

Numbers in assortment

Wire Range: 20-18 Type: Butt Connector 209375

Wire Range: 16-14 Type: Butt Connector 209376

Wire Range: 12-10 Type: Butt Connector 209377

BUTT CONNECTOR INSTALLATION

1. Strip the wire 3/8”. 2. Select a connector that matches the wire gauge and insert the wire into the connector barrel. 3. Make sure the wire is properly seated and crimp the connector using an insulated connector crimping tool nest that matches the color gauge of the connector. Do not crimp the solder sleeve. 4. Repeat steps 1 thru 3 for the other side. 5. Apply heat evenly around the length of the tubing (including the crimp area) from the center out to the ends until the tubing fully recovers and the adhesive flows. 6. Continue distributing the heat over the entire connector barrel until the solder flows into the opening. 7. Remove from the heat and let cool for the ULTIMATE connection. 1. Strip the wire 1/2”. 2. Select a connector that matches the wire gauge and insert the wire into the connector barrel. 3. Make sure the wire is properly seated and crimp the terminal barrel (the 1/4” of the barrel closet to the terminal end) using an insulated connector crimping tool nest that matches the color gauge of the connector. 4. Apply heat evenly around the length of the tubing (including the crimp area) until the tubing fully recovers and the adhesive flows. 5. Continue distributing the heat over the solder sleeve until the solder flows into the terminal barrel. 6. Remove from the heat and let cool for the ULTIMATE connection.

RING, SPADE, SLIP-ON TERMINAL INSTALLATION

MULTILINK TERMINALS

20-18 WIRE RANGE Color Code: RED

209378

209379

209380

209381

209382

209383

209384

209385

Part No.

Size Type

6

8

10

1/4

5/16 Ring

3/8

6

8

Ring

Ring

Ring

Ring

Ring

Spade Tongue

Spade Tongue

Tongue

Tongue

Tongue

Tongue

Tongue

Tongue

E10-17 REVISED OCTOBER, 2018

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.