Sosmetal Products, Inc. 2026 Product Catalog

SOSMETAL PRODUCTS INC.

CHEMICALS

PRODUCT SPECIFICATIONS & APPLICATIONS

Part No. NPL123 • FORCE • Penetrating Chain and Cable Lubricant •

FEATURES AND BENEFITS • 50% more Moly (molybdenum disulfide) for superior lubrication. • Specially formulated with New Hi-EP Grease. • High degree of “tack” creates excellent adhesion as well as superior “film rupture” healing characteristics. • Adheres to the gear, chain or cable without leaving the metal bare after each release. • Highly water resistant. Prevents rust and oxidation. • Test Results Superior Corrosion - rust protection: Superior lubrication - anti wear properties: 5% salt spray booth ASTM D-117 Falex load & wear test ASTM D-3233 Passes 3000+ hours - no failure. Passes max. load of 4500 lbs. - no failure. Torque reading 60.

C11 C12 C13 C14 C15 C10 C16 C17 C18 C19 C20 C21

Products Specifications

Ingedients: Lithium Complex Grease, Liquefied Petroleum Gas, Hexane, Acetone, Molybdenum Disulfide, Polyisobutylene

Vapor density: Above 1.0

Appearance : Black Odor: Petroleum/Solvent/ Oil Like Odor pH: N/A Storage: Below 120°F (49°C)

Evaporation Rate: Residual film will not evaporate Specific Gravity: (Water=1) Approximately 0.76 ∀ .05 Solubility in Water: Negligible

DIRECTIONS FOR USE Shake can well to disperse Moly. Spray point to be lubricated and repeat as needed. For best performance can should be at room temperature (70°F) when used.

Boiling Point: <0°F — +400°F

Part No. NPL127 • CLING-ON • Extreme Pressure Open Gear Lubricant •

FEATURES AND BENEFITS The tacky adhesiveness of this product continuously recoats and lubricates all gear surfaces. Extremely effective when used underwater. Forms a film that resists rust and corrosion. Increases life of all gears. Extreme pressure capacity minimizes squeeze-out

Products Specifications

Ingedients: Petroleum, Paraffin Oil, Hexane, Isohexane, Isomers, Propane, Butane

Appearance : Black Odor: Solvent

Evaporation Rate: Slower than Ether Specific Gravity: (Water=1) 0.76 ± . 0.05 Solubility in Water: Nil

APPLICATIONS AND USES • Open Or Exposed Chains, Wire, Rope Of Cables On Heavy Loads And Extreme Pressure

• Snow Removal Equipment • Marine And Dockside Equipment • Elevators

• Cranes • Drag lines

pH: N/A Storage: Below 120°F (49°C) Boiling Point: <0 TO 156°F

Vapor density: Heavier than air

DIRECTIONS FOR USE Shake can well before using. Spray liberally in short bursts from 12 to 15 inches. Repeat as needed.

Part No. NPL131 • APOLLO • Extreme range Lubricant and Anit-Seize •

FEATURES AND BENEFITS • Highly refined blend of aluminum, copper and graphite. • Contains no lead. • Assures easy disassembly.

Products Specifications

• Superior temperature range: -252°F to 2200°F. • Water and steam proof, non-flammable. • Excellent for long term corrosion protection.

Ingedients: Heptane, Liquefied Petroleum Gas, Acetone, Copper, Graphite

Evaporation Rate: Residual film will not evaporate Specific Gravity: (Water=1) Approximately .78 ∀ .05 Solubility in Water: Negligible

Appearance : Copper Colored Odor: Slight Petroleum Odor pH: N/A Storage: Below 120°F (49°C) Boiling Point: Below 120°F (49°C) Vapor density: Above 1.0

APPLICATIONS AND USES For easy removal of spark plugs, cylinder head bolts, exhaust hardware, disc brake calipers, and all machinery and equipment fasteners. Use to protect metal parts under extreme pressures up to 15,000 p.s.i. and sustained temperatures up to 2200°F.

DIRECTIONS FOR USE 1. Shake well before using. 2. Clean surface of all oil, grease, rust or other contaminates that might prevent a good seal. 3. Spray an even coat 6-12 inches from surface of parts to be assembled.

Part No. NPL134 • MIDNIGHT RIDER • Dry Moly Lubricant •

FEATURES AND BENEFITS • Provides excellent lubrication properties without attraction of dust or dirt. • Provides a smooth, frictionless surface for maximum operating efficiency.

Products Specifications

• Reduces metal wear and fatigue to extend equipment life. • Will not break down under high temperatures.

Ingedients: 2-Propanol, Acetone, Butane, Propane, Ethyl, 3-Ethoxypropionate, Mineral Spirits, Molybdenum Disulfide

Appearance : Dry Black Film Odor:

Vapor density: Heavier than Air Evaporation Rate: Fast than Ether Specific Gravity: (Water=1) 0.73 Solubility in Water: N/A

APPLICATIONS AND USES Use on gears and chains, motors, bearings, boilers, engines, pump assemblies, conveyors, construction equipment, farm implement equipment.

Solvent pH: N/A Storage: Below 120°F (49°C) Boiling Point: <0°F — >395°F <-18°F — >201°F

DIRECTIONS FOR USE Shake well before using. Spray 8-10 inches from surface. Spray a light even film. Wipe off excess with cloth. Repeat application, second coat gives additional protection.

C15-5 REVISED JULY, 2015

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.