Sosmetal Products, Inc. 2026 Product Catalog

CHEMICALS

SOSMETAL PRODUCTS INC.

PRODUCT SPECIFICATIONS & APPLICATIONS

Part No. NPL103 • ONESHOT with Teflon ® • Synthetic Penetrating Gel-Lube •

FEATURES AND BENEFITS • Penetrates • Petroleum free

Products Specifications

• Bonds tenaciously • Protects & preserves • Colorless, stainless and dustless

• Withstands temperatures from - 30° to 530° F • Resists water

Ingedients: Heptane,Polyether Polyol, Liquefied Petroleum Gas

• E.P. rated • Lubricates

Appearance : Clear Colorless Liquid Odor: Solvent odor pH: N/A Storage: Below 120°F (49°C)

Evaporation Rate: Residual Film will not evaporate Specific Gravity: (water=1) Below 0.83 ∀ .05 Solubility in Water: Negligible

APPLICATIONS AND USES • Dollies • Cams • Piano hinges • Locks

• Conveyors • Wheels • Slides • Open gears

• Chains • Rollers • Slide bearings • Cables

Boiling Point: <0°F - >400°F Vapor density: Above 1.0

DIRECTIONS FOR USE Shake well before using. Saturate area to be lubricated. Allow to set-up as gel. Use extension tube for hard-to-reach areas.

Part No. NPL111 • CUTRIGHT • Low Friction Cutting Foam •

FEATURES AND BENEFITS • Foaming action stays on cutting area - Foam runs up drills keeping them cool while continuing to feed cutting area. Eliminates dripping, messy oil and cleanup. • Dramatically cuts heat created by drilling, reaming & tapping.

Products Specifications

• Increases tool life up to10 times longer than ordinary oils. • Reduces thermal expansion creating more accurate hole sizes. • Not recommended for aluminum.

Ingedients: Hydrotreated Petroleum Naphtha, Liquified Petroleum Gas, Chlorinated Paraffin, Lard Oil, Linseed Oil

Appearance : Straw Colored Foamy Liquid Odor: Mild Petroleum Odor

Boiling Point: > 400°F Vapor density: No data

APPLICATIONS AND USES Excellent when tapping, reaming, drilling, threading. Not for use on aluminum.

Evaporation Rate: Will not evaporate Specific Gravity: (Water=1) Approximately .75 ∀ . 05 Solubility in Water: Nil

pH: N/A Storage:

Below 120°F (49°C) But Above Freezing

DIRECTIONS FOR USE Shake well before using. Spray directly on area to be worked and cutting tool. Sprays best at room temperature, 70°F and above. Use extension nozzle to pinpoint spray and eliminate waste.

C15 C14 C13 C12 C11 C10 C20 C19 C18 C17 C16 C21 Appearance : Straw Colored Liquid Odor: Solvent-like pH: N/A Storage: Below 120°F (49°C) Boiling Point: <0°F — >156°F Products Specifications Ingedients: Heptane, Acetone, Liquefied Petroleum Gas, Oxidized Herring Oil, Polymerized Rosin APPLICATIONS AND USES Air compressors Automotive Aelts Dryers Engines Appearance : Clear Amber Odor: Solvent Odor pH: N/A Storage: Below 120°F (49°C) Boiling Point: >250°F Products Specifications Ingedients: Perchloroethylene, Hydrotreated Light Naphthenic Distillate, Hydrotreated Heavy Naphthenic Distillate, Proprietary Rust Preventive, Coal Oil, Carbon Dioxide APPLICATIONS AND USES • Nuts & bolts • Screws • Cables • Chains • Wheels • Casters • Linkages • Studs FEATURES AND BENEFITS • Non-flammable formula - safe for use on energized equipment. • Lubricates all moving parts. • Penetrates through rust and corrosion. Vapor density: Above 1.0 Evaporation Rate: Medium evaporation. Residual film will not evaporate. Specific Gravity: (Water=1) Approximately 1.51 " .05 Solubility in Water: Insoluble Vapor density: Above 1.0 Evaporation Rate: Fast evaporating Specific Gravity: (Water=1) Approximately .68 ∀ .05 Solubility in Water: Negligible

Part No. NPL115 • Gripper • Belt Conditioner •

FEATURES AND BENEFITS • Deep penetration to the innermost fibers. Renews and revitalizes all automotive and industrial V-belts. • Prevents dry rot, reduces stretching and wear.

• Removes and prevents glazing and hardening. • Leaves no gummy deposit to attract dirt and cause wear.

Furnace blowers Garden tractors Powertools Refrigerators

Fans Water Pumps Conveyors

DIRECTIONS FOR USE Spray in well ventilated area. Area to be treated should be free of foreign matter. Spray product back and fourth across the inner working surface of belt from a distance of 10-12 inches. Occasional repeat applications will add life and increase efficiency.

Part No. NPL119 • INVADER • Non-Flammable Rust Penetrant •

• Disperses moisture; dries wires and contacts. • Prevents corrosion; seals out moisture. • Cleans and degreases parts and assemblies.

• Tools • Pillow Blocks • Clamps • Exhaust Parts

• Locks • Padlocks • Hinges • Pulleys

DIRECTIONS FOR USE Safe on most surfaces. Avoid plastics, solvent sensitive materials or painted surfaces. If in doubt, test on an inconspicuous area.

C15-4 REVISED JULY, 2015

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.