Sosmetal Products, Inc. 2026 Product Catalog

FASTENERS & HARDWARE

SOSMETAL PRODUCTS INC.

MASONRY ANCHORS

STUD BOLT ANCHORS

DROP-IN ANCHORS

l The anchor is equal in strength to the bolt and or material in which it is installed. l Pre-assembled and ready to use. l Drilled hole and anchor diameter are the same. l Eliminates hole layout time. l No special tool required. Designed for medium and heavy fastening in solid material.

Designed for flush mount applications in solid base materials.

l Internally threaded. l Deformation controlled expansion anchor. l Preassembled expander plug. l Carbon steel. l Positive setting. l Use drill diameter

Insert anchor tap with hammer. Use setting tool to drive expander plug.

Place fixture over anchor. Insert and tighten fastener.

Drill hole.

same as size as hole diameter.

– SLOTTED FLAT HEAD STYLE –

Drill hole in concrete. Maximum depth of drilled hole could be minimum recommended depth.

HOLE SIZE

ANCHOR LENGTH

PART (INCHES) (INCHES) NUMBER QTY 1/4 2 507294 25 1/4 3 507295 20 1/4 4 507296 20

Protected by LUSTERPLATE TM against rust & corrosion

– ANCHOR –

– TOOL –

Drive stud bolt anchor into drilled hole through fixture so that nut is flush with fixture.

MAX. SETTING

PART

ANCHOR SIZE

HOLE EMBEDMENT LOAD TOOL

NUMBER QTY I.D.xTHREADxLENGTH SIZE

DEPTH

LBS. NUMBER 460 507480 990 507481 1525 507482 2170 507483 2690 507484

– HEX NUT STYLE –

1/4-20 x 1 3/8-16 x 1-1/2 1/2-13 x 2 5/8-11 x 2-1/2 3/4-10 x 3-1/8

3/8 1/2 5/8 7/8

1 2 3

507475 507476 507477 507478 507479

20 20 10 10

HOLE SIZE

ANCHOR LENGTH

1-1/2 2-1/2

Tighten nut until wrench resistance is felt. Anchorage is complete.

PART (INCHES) (INCHES) NUMBER QTY 3/8 1-7/8 507276 25 3/8 3 507277 25 1/2 2-1/4 507278 25 1/2 3 507279 25 5/8 2-1/4 507280 10 5/8 3 507281 10

1

5

DOUBLE EXPANSION ANCHORS

ANCHOR

HOLE SIZE

SIZE HOLDING (INCHES) (INCHES) NUMBER (INCHES) POWER (LBS.) QTY 1/4 1-3/8 507251 1/2 200 10 5/16 1-3/4 507252 5/8 300 10 3/8 2-1/16 507253 3/4 450 10 1/2 2-1/2 507254 7/8 1,000 6 5/8 3 507255 1 1,500 6 3/4 4 507256 1-1/4 2,000 6 LENGTH PART

MACHINE SCREW ANCHORS

l A popular expansion shield made of lead sleeve and thread ed metal cone of rustproof alloy. l Cannot be installed incorrectly.

l In solid masonry, lead sleeve expands into irregularities of holes. l For use with machine screws and bolts.

l Increasing holding power of wall materials. l Heavy duty expansion shield which distributes load on the full length of side casting. l For use with machine bolts.

Part No. 507250 23 pieces • 5 items 12047 plastic tray

– MACHINE SCREW ANCHORS – SIZE LENGTH PART (INCHES) (INCHES) NUMBER QTY 10-24 11/16 507240 12 1/4-20 7/8 507241 12 3/8-16 1-5/16 507242 12 1/2-13 1-9/16 507243 12

– SETTING TOOLS – SIZE PART (INCHES) NUMBER 10-24 507244 1/4-20 507245 3/8-16 507246 1/2-13 507247

507251 507252

507253 507254

507255

Numbers in assortment

LAG SCREW SHIELDS

Provides secure anchorage of lag screws in mortar, stone and other types of solid masonry.

ANCHOR “LONG” HOLE

ANCHOR “SHORT” HOLE

SIZE SIZE (INCHES) (INCHES) NUMBER (INCHES) QTY 1/4 1-1/2 507266 1/2 20 5/16 1-3/4 507267 1/2 20 3/8 2-7/16 507268 5/8 20 1/2 3-1/2 507269 3/4 20 LENGTH PART

SIZE SIZE (INCHES) (INCHES) NUMBER (INCHES) QTY 1/4 1 507261 1/2 20 5/16 1-1/4 507262 1/2 20 3/8 1-3/4 507263 5/8 20 1/2 2 507264 3/4 20 LENGTH PART

l A precision die-cast expansion shield of rustproof alloy. l Heavy external corrugations assure powerful gripping action.

Long Lag Sheilds Part No. 507265 24 pieces • 4 items 12047 plastic tray

507266 507267

507268 507269

Numbers in assortment

A21 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10

A21-8 REVISED OCTOBER, 2012

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.