Sosmetal Products, Inc. 2026 Product Catalog

SOSMETAL PRODUCTS INC.

FASTENERS & HARDWARE

RIVETS

TAP-IT ® HAMMER DRIVE NYLON FASTENER • Tap-It ® hammer drive concrete anchors are tamperproof anchors used in wood, plastic, metal, concrete, fiberglass, block, brick and stone. • They have an anchor body and a steel pin. The pin is hammered flush to the anchor head, which then expands the anchor body. • Body (shell) material is nylon copolymer type 6 resin. • Drive pins (steel) C1008. • Zinc plated to ASTM A-164 and clear chromate dipped. • Heat treated.

A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21

TRUSS HEAD

GRIP RANGE

PART NUMBER

DIA.

LENGTH

MIN.

MAX.

706-102 706-104 706-118 706-120 706-122 706-124 706-128

3/16 3/16

3/4

1/16

1/4 5/8 5/8 7/8

1

1/4

1/4 1/4 1/4 1/4 1/4

3/4

3/16 3/16

1

1-1/2

3/8 7/8

1-1/4 1-3/4

2 3

1-3/4 2-1/2

UNI-TAP ® NYLON THERMAL NON-CONDUCTIVE FASTENER

The Lowest Thermal Conductive Fastener Today... For reefers, Uni-Tap’s non-conductive nylon confers a unique, major advantage over conventional metal fasteners (which draw severe winter cold into a trailer interior, causing condensation and icing) or those with a nylon pin (which are considerably more expensive as well as being difficult to drive). Uni-Tap’s other features - strength, ease of installation and low cost - make it equally welcome for use in dry vans. Exceptional Strength! Uni-Tap ® is made of tough Dupont nylon. This allows for a high sheer and tensile strength. It has the impact resistance to take hammer drive installation and the strength to hold firmly in place. • Withstands temperatures to -60° F. • 100% nylon, FDA approved. • Tamper-resistant, vibration resistant. • Non-corrosive.

• Can be used in the following materials: plywood, plastic, studs, plexiglas, concrete, sanitary wall systems, block, metal, brick and foam insulation.

GRIP RANGE

PART NUMBER

DIA. 1/4 1/4 1/4

LENGTH

MIN.

MAX.

706-150 706-152 706-154

1

3/16

1/2

1-5/8 2-5/8

3/8 7/8

1-1/8 1-5/8

A19-11 REVISED FEBRUARY, 2021

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.