Sosmetal Products, Inc. 2026 Product Catalog

First page Table of contents Previous page 206 Next page Last page

FASTENERS & HARDWARE

SOSMETAL PRODUCTS INC.

THREADED INSERTS - KEENSERTS

KEENSERTS ®

Strong, permanent thread repairs - No special drills, taps or installation tools required.

l Install using standard drills and taps. l Easy hand installation. l Impossible to cross threads while installing. l No tang to break-off. l Positive mechanical lock against rotation. l May be used in virtually any material: Aluminum, Magnesium, Cast Iron, Steel and Plastic. l Provides high strength & reliability, one length per size provides maximum pullout strength, breaks Grade 8 bolts in test after test. l Easy to remove. l No special skills required. Installation procedures can be learned in minutes.

Quick and Easy to install...

* Drive “Kees” down with sev eral light taps.

Screw in insert until slightly below surface. “Kees” act as depth stop.

Tap new threads, using standard tap.

Drill out old threads, using standard drill.

Finished.

* Use Keensert kee drive or standard tools.

KEENSERTS ® THREADED INSERT ASSORTMENTS MASTER KEENSERTS & KEE DRIVERS Contains all coarse and fine thread Keenserts and all metric sizes plus one kee driver per inside dia. size Part No. 713100 107 pieces • 28 items • 12062 steel tray

USS (COARSE) & SAE (FINE) Contains all sizes of coarse & fine thread

Keenserts #10 - 1/2 Part No. 713103 52 pieces • 12 items 12043 plastic tray

713111 713112 713113 713114

713115 713116 713117 713118

713119 713120 713121 713122

713131 713132 713133 713134

713135 713136 713171 713172

713174 713175 713161 713162

713164 713165 713166 713167

713111 713112 713113

713114 713115 713116

713117 713118 713119

713120 713121 713122

Numbers in assortment

SHOP USS (COARSE) Contains all sizes of coarse thread

SHOP SAE (FINE) Contains all sizes of fine thread

Keenserts #10 - 1/2 Part No. 713101 26 pieces • 6 items 12028 plastic tray

Keenserts #10 - 1/2 Part No. 713102 26 pieces • 6 items 12028 plastic tray

713111 713113

713115 713117

713119 713121

713112 713114

713116 713118

713120 713122

Numbers in assortment

MASTER KEENSERTS ® REFERENCE GUIDE Sometimes when you compare cost alone, you don’t realize the entire story. Other factors must be considered. Quality of material, ease of installation, skill required and investment in special tools are all factors which favor keenserts over other inserts and make keenserts your most cost effective repair.

INSTALLATION DATA TAP SIZE & KEENSERTS STOCK NO. KEE DRIVER

REMOVAL DATA

INTERNAL

EXTERNAL

KEENSERT

DRILL SIZE & STOCK NO.

DRILL DEPTH

THREAD SIZE THREAD SIZE STOCK NO.

713111 713112 713113 713114 713115 713116 713117 713118 713119 713120 713121 713122 713123 713124 713125 713126 713161 713162 713164 713165 713166 713167

10-24 10-32 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 7/16-14 7/16-20 1/2-13 1/2-20 5/8-11 5/8-18 3/4-10 3/4-16

‘‘I’’

5/16-18’’ 813815 3/8-16’’ 813816 7/16-14’’ 813817 1/2-13’’ 813818 9/16-12’’ 813819 5/8-11’’ 813820

7/32’’ 813511 9/32’’ 813515 11/32’’ 813519 13/32’’ 813523 15/32’’ 813527 17/32’’ 814756 25/32’’ 813613 31/32’’ 814784

713131

5/16-18

5/32’’

813582

‘‘Q’’

713132

3/8-16

3/16’’

813590

‘‘X’’

713133

7/16-14

3/16’’

813597 29/64’’ 813526 33/64’’ 814755 37/64’’ 814759 53/64’’ 814775 1-1/16’’ 814788

713134

1/2-13

3/16’’

713135

9/16-12

3/16’’

713136

5/8-11

3/16’’

713137

7/8-14

7/8-14’’

3/16’’

713138

1-1/8-12

1-1/8-28’’

3/16’’

Metric Sizes

‘‘H’’ 813581 ‘‘S’’ 813592

713171 713172 713174

7/32’’ 813511 19/64’’ 813516

M5 x 0.8 M6 x 1.0 M8 x 1.0 M8 x 1.25 M10 x 1.25 M10 x 1.50

M8 x 1.25 M10 x 1.25 M12 x 1.25

8 x 1.25 10 x 1.25 12 x 1.25

5/32’’ 3/16’’ 3/16’’

27/64’’ 813524

3/8’’

813521 29/64’’ 813526

1/2’’

713175

M14 x 1.50

14 x 1.50

813529

A21 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10

A17-4 REVISED JULY, 2019

Made with FlippingBook - Online catalogs