2026 Industrial MRO Catalog

TOOLS & SHOP SUPPLIES

PAT R I O T WELD IN G RODS

HAWK (Steel) Extra low hydrogen electrode produces an exceptionally smooth, spatter free arc transfer on mild and low alloy steels. This electrode exhibits unusually good AC wedling characteristics, slag release and instant re-strike. APPLICATIONS: For joining and repairing of boiler plate, pipe steels, shipbuilding steels, and cast steels. Ideal for weathering steels and steels, such as “Corten”. Great for overlaying shafts and other worn parts. It is also used to repair and fabricate cold and hot rolled steels and most con struction grades. Use on angle irons, beams, tanks and farm equipment. WELDING TECHNIQUES: Clean weld area and chamfer or bevel as needed. Maintain a short arc gap and use a stringer or slight weave technique. Chip slag thoroughly between passes. Peen weld immediately after breaking the arc. WELDING POSITIONS: Flat, Vertical up, Vertical down, Horizontal, Overhead RECOMMENDED CURRENT: DC reverse (+) or AC

MATADOR (Tool Steel)

Tubular large diameter chromium carbide rods for “hard facing”. Thin walled tubular construction allows for very low amperages. General wear protection on all iron base parts subject to abrasion.

APPLICATIONS: Matadors’ special bendable aluminum grip end caps allow for easy gripping & positioning of the electrode. Some typical applications include augers, bucket lips and chutes for transporting sand and gravel. WELDING TECHNIQUES: Using lowest possible amps and while holding the electrode 10° from the vertical position, deposit either stringer or weave beads. WELDING POSITIONS: Flat, Horizontal, Vertical up, Overhead

RECOMMENDED CURRENT: DC reverse (+) or AC

TYPICAL MECHANICAL PROPERTIES: Undiluted Weld Metal

TYPICAL MECHANICAL PROPERTIES: Undiluted Weld Metal

Maximum Value Up To

Maximum Value Up To 84,000 psi (610 N/mm 2 ) 69,000 psi (500 N/mm 2 )

Hardness

Rockwell C57-60 Vickers 665-700

Tensile strength Yield strength Elongation Impact Energy

Wear Co-efficient

2%

32%

90J: (-30°C)

DIAMETER PART

REC.

LENGTH ELECTRODES/

DIAMETER PART

AMPERAGE LENGTH ELECTRODES/

(INCHES)

NUMBER AMPERAGE (INCHES)

POUND

(INCHES)

NUMBER SETTINGS (INCHES)

POUND

1/8 5/32

95/140 130/190

14 14

12

1/4 3/8 1/2

100 175 215

18 18 18

5 4 3

818197 818196

818404 818406 818408

8

STINGER (Steel) Excellent for high strength steel structures that require toughness and crack resistance to temperatures as low as -76°F (-60°C). Low hydrogen, low temperature, extra low moisture content is below .14%. APPLICATIONS: Nickel bearing low hydrogen designed for joining low alloy steels requiring high elongation combined with excellent low temperature impact values. WELDING TECHNIQUES: Remove all surface contami nants. Maintain a short arc gap and use a stringer or slight weave technique. Chip slag thoroughly between passes. WELDING POSITIONS: Flat, Vertical up, Vertical down, Horizontal, Overhead

D14 D13 D12 D11

RECOMMENDED CURRENT: DC reverse (+) or AC

TYPICAL MECHANICAL PROPERTIES: Undiluted Weld Metal

Maximum Value Up To 92,000 psi (670 MPa) 76,000 psi (500 MPa) 100J: -76°F (-60°C) 90J: -103°F (-75°C) 35J: -148°F (-100°C) 29%

Tensile strength Yield strength Elongation Impact energy

DIAMETER PART

REC.

LENGTH ELECTRODES/

(INCHES)

NUMBER AMPERAGE (INCHES)

POUND

3/32 1/8

65/100 100/140

14 14

21 12

818203 818204

D13-4 REVISED JUNE, 2021

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.