Sosmetal Products, Inc. 2026 Product Catalog

FASTENERS & HARDWARE

SOSMETAL PRODUCTS INC.

NUTS

*Product standards require all grade-marked nuts 1/4” diameter and larger to have a raised or depressed insignia identifying its manufacturer. “X” represents one location such an insignia may appear.

GRADE 8 ALLOY HEX NUTS

For use with Grade 8 Cap Screws

Protected by ZINC-YELLOW DICHROMATE™ against rust & corrosion

l Minimum 150,000 PSI proof load.

*

PART NO. PART NO. WRENCH NUT SIZE USS THREAD SAE THREAD SIZE HEIGHT QTY 7/8 502691 502692 1-5/16 3/4 10 1 502693 502694 1-1/2 55/64 10 1-1/8 502695 502696 1-11/16 31/32 1 1-1/4 502697 502698 1-7/8 1-1/16 1 1-3/8 502671 502672 2-1/16 1-11/64 1 1-1/2 502699 502670 2-1/4 1-9/32 1 1-3/4 502673 --- 2-5/8 1-1/2 1 2 502674 --- 3 1-23/32 1 -- --- --- -- -- -

PART NO. PART NO. WRENCH NUT SIZE USS THREAD SAE THREAD SIZE HEIGHT QTY 1/4 502675 502676 7/16 7/32 100 5/16 502677 502678 1/2 17/64 100 3/8 502679 502680 9/16 21/64 100 7/16 502668* 502669† 5/8 3/8 25 7/16 502681 502682 11/16 3/8 50 1/2 502683 502684 3/4 7/16 50 9/16 502685 502686 7/8 31/64 30 5/8 502687 502688 15/16 35/64 30 3/4 502689 502690 1-1/8 41/64 20

Approved style of grade marking as issued by SAE J995, revised July 1999.

† Not included in assortments.

MASTER ASSORTMENT Sizes: 1/4” through 1” USS (COARSE) & SAE (FINE) Part No. 501092 204 pieces • 20 items • 12071 steel tray

Sizes: 1/4” through 9/16” USS (COARSE) Part No. 502001 103 pieces • 6 items 12028 plastic tray

Sizes: 1/4” through 9/16” SAE (FINE) Part No. 502002 103 pieces • 6 items 12028 plastic tray

502675 502676 502677 502678

502679 502680 502681 502682

502683 502684 502685 502686

502687 502686 502689 502690

502691 502692 502693 502694

502675 502677

502679 502681

502683 502685

502676 502678

502680 502682

502684 502686

Asst. No. 501092 is shown here.

Numbers in assortment

Numbers in assortment

Numbers in assortment

GRADE 5 HEX NUTS

For use with Grade 5 Cap Screws

Protected by LUSTERPLATE TM against rust & corrosion

l Minimum proof load USS 1/4 - 1’’ = 120,000 PSI USS 1 - 1-1/2’’ = 105,000 PSI

SAE 1/4 - 1’’ = 109,000 PSI SAE 1 - 1-1/2’’ = 94,000 PSI

PART NO. PART NO. WRENCH NUT SIZE USS THREAD SAE THREAD SIZE HEIGHT QTY 1/4 503260 503261 7/16 7/32 100 5/16 503262 503263 1/2 17/64 100 3/8 503264 503265 9/16 21/64 100 7/16 503266 503267 11/16 3/8 50 1/2 503268 503269 3/4 7/16 50 9/16 503270 503271 7/8 31/64 25 5/8 503272 503273 15/16 35/64 25 3/4 503274 503275 1-1/8 41/64 25 7/8 503276 503277 1-5/16 3/4 10 1 503278 503279 1-1/2 55/64 10 1-1/8 503280 503281 1-11/16 31/32 5 1-1/4 503282 503283 1-7/8 1-1/16 5 1-1/2 503284 503285 2-1/4 1-9/32 5

*

Approved style of grade marking as issued by SAE J995, revised July 1999.

Asst. No. 501530 is shown here.

MASTER ASSORTMENT Sizes: 1/4” through 1” USS (COARSE) & SAE (FINE) Part No. 501530 204 pieces • 20 items • 12071 steel tray

Sizes: 1/4” through 9/16” USS (COARSE) Part No. 503026 103 pieces • 6 items 12028 plastic tray

Sizes: 1/4” through 9/16” SAE (FINE) Part No. 503027 103 pieces • 6 items 12028 plastic tray

503260 503261 503262 503264

503264 503265 503266 503267

503268 503269 503270 503271

503272 503273 503274 503275

503276 503277 503278 503279

503260 503262

503264 503266

503268 503270

503261 503263

503265 503267

503269 503271

Numbers in assortment

Numbers in assortment

Numbers in assortment

A21 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10

A11-2 REVISED OCTOBER, 2012

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.