Sosmetal Products, Inc. 2026 Product Catalog

VEHICLE MAINTENANCE

SOSMETAL PRODUCTS INC.

EXHAUST HARDWARE and TRUCK/BUS/FARM/INDUSTRIAL

EXHAUST MANIFOLD CLAMP-A-STUD THE CLAMP-A-STUD IS NOT A TEMPORARY CLAMP! IT’S MADE OF FORGED STEEL. Clamp-A-Stud is a permanent, durable, professional alternative to the time and expense of drilling and tapping out broken studs. It even works on some manifolds with cracked or broken tangs.

IF YOU’RE LUCKY THIS JOB WILL TAKE HALF AN HOUR

IF YOU’RE SMART, IT WILL TAKE TEN MINUTES

PART

SIZE RANGE (INCHES) 1-1/4 - 2-3/4

FITS MOST

NUMBER 825501

Domestic w/o Heat Riser

Give Clamp-A-Stud a try. No One’s Lucky All The Time

You know the problem: broken or impossible to get at manifold studs. Hey, it happens, If you’re lucky, it’s a half-an-hour job. If you’re not, it means extra time on the bench (or at the machine shop) and extra costs that somebody’s got to absorb. Now there’s a new way to deal with broken or problem studs. Clamp-A-Stud. The Clamp-A-Stud comes in four sizes which fit almost every manifold made. There’s also a special Clamp-A-Stud for GM and Chevrolet 350 and 400 Heat Riser Type Manifolds. And the price won’t break you. So why take an hour or more to do a ten-minute job? Be smart.

EXHAUST SYSTEM SEALCLAMPS

The sure way to seal exhaust system joints.

Easy-To-Install

l Stainless steel. l Grade 8 hardware included. l No need for welding. assembled exhaust. l Flat band.

PART

SIZE

PART

SIZE

Most states require school buses to use sealclamps on all exhaust system joints for extra safety and protection.

NUMBER 425221 425223 425225

NUMBER 425226 425227 425228

2 3

3-1/2

2-1/2

4 5

All sizes 3-1/2” wide.

FLEXTITE “LAPJOINT” BAND CLAMPS

Pre-formed with raised center ridge for perfect alignment and improved sealing.

l Stainless steel. l Invidually boxed.

l Completely assembled ready for installation.

PART

SIZE

PART

SIZE

Joins straight pipe to flexible tube, providing a leak-proof secure seal.

NUMBER 425241 425242 425243

NUMBER 425244 425245

2-1/2 3-1/2 3

4 5

WEATHERCAPS ®

Vertical Exhaust Stack Protection from Dirt, Weather and Insects.

H19 H18 H17 H15 H14 H13 H11 H10 For use on farm tractors, diesel engines, combines, hay balers, stationary power units, pumps, road pavers, irrigation wells, compressors, concrete mixers, rock crushers, earth movers, trucks: over-the-road, local delivery and construction.

All steel construction built to last and last. Adjustable hinge bolt - stainless steel bushing assembly.

Opens immediately at first pressure.

Just tighten one bolt - rain cap is ready for work.

Perfect balance for perfect operation.

Baked aluminum for perfect operation.

Uniform expansion & contraction with exhaust stack temperatures.

ONLY WEATHERCAP ® OFFERS THESE FEATURES:

l There is an engineered Weathercap size for each stack diameter. Over 20 different sizes to choose from. Fit vertical exhaust stacks from 1” to 7-15/16” O.D. l Weathercap’s proven design opens to full vertical position. The slightest pressure inside the stack operates Weathercap so engine breathes freely.

O.D. l Closes instantly when exhaust pressure stops. Proper counter-balancing and high hinge point, allow Weathercap to close tightly even in abnormal parking angles. Use only ORIGINAL Weathercaps. ® Don’t depend on substitutes. PROTECT YOUR EQUIPMENT INVESTMENT! l Easy installation. Simply position and tighten one bolt. No holes to drill. No clamps needed.

MIN. EXHAUST MAX. EXHAUST

MIN. EXHAUST MAX. EXHAUST

PART

TYPE

O.D.

O.D.

PART

TYPE

O.D.

NUMBER 425331 425333 425334 425335 425338 425340

NO.

(INCHES)

(INCHES) 1-7/16 1-15/16 2-3/16 2-7/16 3-3/16 3-11/16

NUMBER 425341 425342 425346 425348 425351

NO.

(INCHES)

(INCHES) 3-15/16 4-3/16 5-3/16 5-11/16

1 3 4 5 8

1-1/4 1-3/4 2-1/4 3-1/2 2 3

11 12 16 18 21

3-3/4

Be Aware Of The Dangers And Risks Of An Open Vertical Exhaust Stack • Reduced engine performance • Income loss due to equipment down time • Repair expenses • Unplanned work rescheduling •

4 5

5-1/2 6-5/8

6-3/4

10

NOTE: Mounting band adjusts for differences of 3/32” over or under stack size.

H19-4 REVISED OCTOBER, 2012

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.