Sosmetal Products, Inc. 2026 Product Catalog

SOSMETAL PRODUCTS INC.

VEHICLE MAINTENANCE

ENGINE SERVICE and EXHAUST TOOLS

SERPENTINE BELT WRENCH SET l Will service approximately 85% of all vehicles with serpentine belts having a spring loaded tensioner pulley. l Ratcheting wheels allow quick, easy indexing of wrench driving end to allow user to approach the tensioner from any accessible angle. l Wrenches fit tensioners requiring 13mm (1/2”), 14mm, 15mm, 16mm (5/8”), and 18mm hex, and 3/8” and 1/2” square drive sizes to service most applications. Sold as a 2 piece set only. l Slim head design allows access to tight areas found in the tensioned area on some front wheel drive vehicles.

RADIATOR DRAIN COCK SOCKET Eliminates twisting or breaking of drain cock ears.

G10 G11 G12 G13 G14 G15 G16 G17 G18

l Special slotted socket fits over drain cock ears. l Use 3/4’’ wrench or screwdriver to turn socket.

l Opens the tightest drain cock without breakage. l Fits brass or nylon drain cock. l 2’’ overall length.

Part No. 213110

Part No. 114414 WINDSHIELD WASHER SOLUTION HYDROMETER

CYLINDER HONE

l 3 stones provide more cutting surface, assure quick removal of cylinder glaze. l Adjustable stop-collar permits quick selection of two range settings, from 2” to 4” & from 4” to 7”. l Operates with any electric drill. l Comes with one set of 220 grit stones.

l Accurately tests the freezing point of methanol/water and windshield washer solution. l This unbreakable hydrometer gives an instant freeze protection reading. l Complicated temperature adjustments are unnecessary. l This hydrometer will save you money and is E-Z to use. l Specially formulated plastic will not react with methanol, giving years of easy-to-read service.

Part No. 213277

REPLACEMENT STONES, 220 GRIT Part No. 213278

Part No. 113446

HOSE PINCH-OFF PLIERS

l No need to drain system when changing thermostats. Save coolant – save time. l Jaws swivel for parallel clamping. Heat treated, steel arms automatically lock with locking ratchet.

l May also be used to pinch off vacuum lines. l Not for use on wire reinforced radiator hose.

Part No. 113445

EXHAUST PIPE SHAPER Rounds out crushed or bent exhaust and tailpipes.

l Works equally well inside pipe or outside. l Makes installing mufflers and pipe easy.

Part No. 11393

G16-13 REVISED NOVEMBER, 2014

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.