Sosmetal Products, Inc. 2026 Product Catalog

VEHICLE MAINTENANCE

SOSMETAL PRODUCTS INC.

WELDON LIGHTING

STOP, TURN and TAIL LENS Surface Mount Series Commonly used on school buses, ambulances and fire trucks where high visibility signaling is desired. l Our 7” x 8” lamp series is available in both double and single function for stop, turn and tail lamps. — REPLACEMENT PARTS — PART DESCRIPTION

CLEARANCE MARKER LAMPS Surface Mount Series Used as an identification & clearance marker lamp. l The WT5050 series is designed with a rugged steel base. l Features pass-through lens mounting screws. l Mounts on 1.5” centers and grounds through the base.

— REPLACEMENT PARTS —

PART

DESCRIPTION

NUMBER 628539 628538

RED , Lens

WT5020R

NUMBER 628523 628522

RED , Lens

WT2011R

WT5020A AMBER , Lens

WT2011A AMBER , Lens

PART

DESCRIPTION MOUNT COLOR BULB AMP

NUMBER 628541 628540

Surface RED

WT5050R WT5050A

Marker Marker

904

.69 .69

Surface AMBER 904

EIGHT-WAY FLASHER Surface Mount Series Meets every conceivable school bus application.

CLEARANCE MARKER LAMPS Surface Mount Series Common in the school & commercial bus markets.

l The WT5000 series features a rugged steel base. l Mounts on 1.5” centers, grounds through the base and has a single lead wire. l 3 candlepower.

l All internal components and electronics are potted to provide pro tection from humidity, moisture, road shock and vibration. l Sealed unit contains eleven fast-on blade terminals, including ground to reduce installation time and confusion. l 16 amp terminal load with overload protection and installation and connection instructions printed on the flasher s surface. l The flasher can be mounted with two #10 screws. l The WT7000 can be easily adapted for a four-way lamp application.

— REPLACEMENT PARTS —

PART

DESCRIPTION

NUMBER 628537 628536

RED , Lens

WT5002R

WT5002A AMBER , Lens

PART

DESCRIPTION MOUNT COLOR BULB AMP

NUMBER 628535 628534

PART

DESCRIPTION MOUNT

Surface RED Surface AMBER 168 168

WT5000R WT5000A

Marker Marker

.35 .35

NUMBER 628546

WT7000

Universal

Surface

MODEL SBF90 EIGHT-LAMP FLASHER

CLEARANCE MARKER LAMPS Surface Mount Series l Our armored clearance marker lamp series features two bulbs for redundant light sources. l The WT5100 series has a bright, chrome-plated shield for years of beautiful service. l Mounts on 4.5” centers, grounds thru the mounting base and has two-lead wires. l 2 candlepower per bulb.

Designed primarily for the parts replacement market, this flasher is a “drop in” replacement for the Weldon 7000 and Transpec 6500 flashers in that it has the same mounting hole centers, terminal types, pin assignments and functionality.

— REPLACEMENT PARTS —

Part No. 628590

PART

DESCRIPTION

l Eleven (11) 0.250 inch Faston terminals for wiring connections. l Industry standard functions, including Sequential and Non-Sequential operation. l Six inch mounting hole centers. l Small size - one inch high, less than one inch wide & 6.5 inches long. l Rugged anodized aluminum case. l Sealed electronics - no potting compound. l High efficiency electronic switching circuit design - low heat loss. l Design safeguards for over current, over temperature, short circuit and loss of ground. l Standard functionality provides for both sequential & nonsequential operation, and will accommodate 4-lamp & 8-lamp warning light config urations. l Each of the lamp outputs (two red and two amber) are rated at 16 amps. The output for the stop arm is rated at 3 amps. l Provides safeguards for over current, over temperature, short circuit, and losss of ground. Advanced electronic circuity employs surface mount technology (SMT). It’s metal case is made of rugged anodized aluminum. l Utilizes the Tyco/Amp Multilock Series 070 connector system. The 12-pin header (containing male pins) is integral to the flasher case. The 12-pin connector plug (not supplied with the flasher) uses female pins. l Sixteen amp lamp outputs. l Three amp stop arm output.

NUMBER 628537 628536

RED , Lens

WT5002R

WT5002A AMBER , Lens

PART

DESCRIPTION MOUNT COLOR BULB AMP

NUMBER 628545 628542

G18 G17 G16 G15 G14 G13 G12 G11 G10 Surface RED 1895 .54

WT5100R WT5100A

Marker Marker Marker Marker

Surface AMBER 1895

.54 .54 .54

Surface RED

628549* WT5100R3W 628544* WT5100A3W

1895

Surface AMBER 1895

*3 wire

EIGHT-LAMP SCHOOL BUS ELECTRONIC FLASHER/CONTROLLER

l Ultra compact size - 2.30” x 1.25” footprint and Amp Multilock connector makes it ideal for OEM applications, as well as a replace ment for Amp Multilock based flashers cur rently on the market. l Connector based wiring terminations - saves manufacturing time and reduces errors. l Industry standard functions - compatible with existing bus designs. l High efficient power switching design - very low heat loss.

Part No. 628294

G15-2 REVISED OCTOBER, 2012

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.