Sosmetal Products, Inc. 2026 Product Catalog

ELECTRICAL FASTENERS

SOSMETAL PRODUCTS INC.

WIRE COVERINGS & FITTINGS

LIQUID TIGHT ELECTRICAL CONDUIT and FITTINGS

FITTINGS

CONDUIT

• Liquid tight conduit is non-metallic, gray PVC construction, and meets UL Type B. • The smooth inner surface allows for quick feeding of wires with no sharp edges to damage conductors. • Lightweight and resistant to crushing, easily cut to length with a knife. • Suitable for either indoor or outdoor use. • Use with fittings at right for a liquid-tight connection. • UL rated for 80° C dry, 60° C wet, 70° C oil resistant. CSA rating for -18° C to 75° C.

• Nylon construction is suitable for indoor and outdoor use. • The conduit can be pushed into the fitting and the sealing nut is tightened, the tubing does not have to be threaded onto the nut. • The connector is supplied with an O-ring and steel locking nut. • For larger tubing sizes, standard metallic trade fittings can be used. Gray color. STRAIGHT-IN FITTING

Use With Liquid Tight Conduit Only

RIGHT ANGLE FITTING

PART NUMBER CONNECTOR SIZE STRAIGHT-IN RIGHT ANGLE THREAD IN. TYPE TYPE SIZE 3/8 210620 210624 1/2 NPT 1/2 210621 210625 1/2 NPT 3/4 210622 210626 3/4 NPT 1 210623 210627 1 NPT

SIZE

PART

TYPICAL TYPICAL STANDARD

IN. 1/2 3/4

NUMBER 210611 210612 210613

O.D. 0.83 1.04 1.30

I.D.

PACK FT.

0.63 0.83 1.05

50 50 50

1

FLEXIBLE ELECTRICAL TUBING and FITTINGS

FITTINGS

TUBING

• Nylon construction is suitable for indoor and outdoor use. • Both threaded-in, straight-in and right angle, and snap-in straight-in type only. Fittings can only be used with flexible electrical tubing, shown at left.

E15 E14 E13 E12 E11 E10 • Highly flexible black PVC tubing for a non-metallic covering over wires, or fiber optic cables. • Available from 1/4” to 1” I.D. • Resistant to oil, water and corrosion, excellent in high vibration areas or where flexing occurs. • Cut to length with a knife. • UL recognized under the component program. • CSA certified for 3/8” and larger sizes.

• The fitting does not have to be disassembled for use, simply push tubing in and tighten the lock nut and snap or screw into place.

STRAIGHT-IN FITTING

• For larger tubing sizes, standard metallic trade fittings can be used. – THREADED FITTINGS – SIZE STRAIGHT-IN RIGHT ANGLE THREAD IN. TYPE TYPE SIZE 3/8 210640 210644 1/2 NPT 1/2 210641 210645 1/2 NPT 3/4 210642 210646 3/4 NPT 1 210643 210647 1 NPT

Extra Flexible!

RIGHT ANGLE FITTING

– SNAP-IN FITTINGS –

SIZE

PART

TYPICAL TYPICAL STANDARD

SIZE

STRAIGHT MOUNTING

IN. 1/4 3/8 1/2 3/4

NUMBER 210630 210631 210632 210633 210634

O.D. 0.57 0.70 0.83 1.04 1.30

I.D.

PACK FT.

IN. 1/4 3/8 1/2 3/4

SNAP IN

HOLE DIA.

0.40 0.49 0.63 0.83 1.05

50 50 50 50 50

0.500 0.875 0.875 1.093 1.375

210648 210649 210650 210651 210652

SNAP-IN FITTING

1

1

E12-24 REVISED FEBRUARY, 2024

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.