Sosmetal Products, Inc. 2026 Product Catalog

SOSMETAL PRODUCTS INC.

ELECTRICAL FASTENERS

NON-INSULATED TERMINALS

#2 WIRE RANGE

E10 E11 E12 E13 E14 E15

209192

209193

209194

209195

209199

Part No.

Size Type

1/4

5/16

3/8

1/2

Ring Tongue

Ring Tongue

Ring Tongue

Ring Tongue

Butt Connector

UNINSULATED STEP-DOWN CONNECTORS Unsealed - No Heat Shrink Tubing.

209450

209451

PART

SIDE #1

SIDE # 2

NUMBER QTY COLOR STRIPE WIRE

CRIMP DIE (INSULATED)

COLOR STRIPE WIRES

CRIMP DIE (INSULATED)

209450 50 White 209451 50 Red 209452 50 Blue 209453 50 Yellow

24-22 AWG White (24-22 AWG) 20-18 AWG Red (20-18 AWG) 16-14 AWG Blue (16-14 AWG) 12-10 AWG Yellow (12-10 AWG)

Red Blue Red Yellow

20-18 AWG Red (20-18 AWG) 16-14 AWG Blue (16-14 AWG) 12-10 AWG Yellow (12-10 AWG)

209452

209453

8 AWG

Red (8 AWG)

QUICK DISCONNECT TERMINALS

Convert stud terminals to quick disconnects.

Double Male Connector

Double Female Bullet Receptacle .156 Dia.

''Y'' Adapter Two .250'' Male to one .250'' Female

Male Junction Block Tabs Screw Size: 6

Male Junction Block Tabs Screw Size: 8

Tab width: .250 (1/4) vinyl insulated

Tab width: .250 (1/4) Part No. 210228 100

Tab width: .250 (1/4) Part No. 210229 100

Part No. 210550 100

Part No. 210432 100

Part No. 210462 100

Parallel Adapter Two .250'' Male to one .250'' Female

Female Tab 26-20 ga. wire Tab width: .110 Non-Insulated Part No. 210361 50

Female Tab 16-14 ga. wire Tab width: .110 Non- Insulated Part No. 210362 50

Female Bullet Receptacle 18-14 ga. wire .156 Dia. Non-Insulated Part No. 210363 25

Piggy-Back Adapter Two .250'' Male to one .250'' Female

Part No. 210360 25

Part No. 210463 100

WIRE PIN TERMINALS

FUSE TAP

Used in truck/trailer junctions & plugs, and in European terminal blocks.

For Blade Fuses Tab width: .250 (1/4)

16-14 ga. wire Pin Length: .37 Non-Insulated

12-10 ga. wire Pin Length: .46 Non-Insulated

22-18 ga. wire Pin Length: .37 Non-Insulated

Part No. 210365 50

Part No. 210366 50

Part No. 210364 50

Part No. 210283 100

MINIFUSE TAP ADAPTER

Directions for installation:

Tap the hot side of the MINIFUSE to power car stereos, alarms, CB’s & add-on accessories. Slip the leg of a MINIFUSE through the contact slot of the tap, fold the tap over the top into the vehicles MINIFUSE block.

To tap current slip a crimped .187 fully insulated female quick connect over the tab of the MINIFUSE and plug.

Part No. 615233 50

E10-37 REVISED OCTOBER, 2018

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.