Sosmetal Products, Inc. 2026 Product Catalog

HEAT SHRINK CONNECTORS & TUBING ELECTRICAL FASTENERS

SOSMETAL PRODUCTS INC.

E-Z VIEW COLOR-CODED WINDOW BUTT CONNECTORS

Our Solution

Your Problem

E-Z View Color-Coded Window Butt Connectors: • Ensures the wire is crimped to connector • Ensures the center of crimp barrel is properly crimped • E-Z View waterproof insulation allows for indisputable inspection of the wire’s inpspection

Standard connectors do not allow the installer to see the wire which can result in the following problems: • Wire stripped too short, which can result in crimping the end of the wire. • Wire is not fully seated to connector, which can result in a poor termination.

• Color-coded stripes identify wire gauge size to be used with connector. • Color-coded stripes also indicate/guide the installer to the proper crimp position on the center.

• Wire-stop in butt connectors prevents over-insertion of wire. • Window in center of connector assures that wire is seated properly and that the wire is being crimped to the connector.

PART

COLOR-CODED WIRE

NUMBER QTY 210160 100 210161 100 210162 100

STRIPES

GAUGE 22-18 16-14 12-10

Red Blue

Yellow

Part No. 501768 78 pieces • 6 items 12051 steel tray

Part No. 201169 54 pieces • 6 items 12047 plastic tray

210160 210161

210162 210163

210164 210165

210160 210161

210162 210163

210164 210165

Numbers in assortment

Numbers in assortment

Both assortments contain E-Z VIEW Butt Connectors and CLEAR-VIEW Heat Shrink Tubing

CLEAR-VIEW ADHESIVE-LINED HEAT SHRINK TUBING

E15 E14 E13 E12 E11 E10 The Competitor’s Clear Heat Shrink Tubing Vs.

Our CLEAR-VIEW Heat Shrink Tubing

What’s special about this heat shrink tubing?

• Constructed of a cross-linked ionic polymer material for superior strength.

• Lightweight material is easy to work with and can be cut using simple shears or scissors.

Lined with a hot-melt adhesive to provide a completely waterproof seal

• Wire AWG is printed on the side for easy size ID.

• Exceeds 2.5-to-1 shrink ratio, to contain connectors up to 2 and a half times larger than your cable

Absolutely clear tubing provides ultimate clarity for visual inspection at any time.

Specifications: Material: Cross-linked ionic polymer Shrink Ratio: Exceeds 2.5 to 1 Shrink/Recoveray Temperature: 90°C (194°F) Continuous Operating Temp: -55°C to 125°C (-67°F to 257°F) Flammability: Passed (FMVSS 302 test) Tensile Strength: 4,000 psi Longitudinal Change: + 1/-10% Max Dielectric Strength: 750 V/Mil (30KV/MM)

PART MAXIMUM NUMBER QTY GAUGE COLOR LENGTH EXPANDED I.D. RECOVERED I.D. 210163 10 22-18 Clear 6” 0.176” 0.045” 210164 10 16-14 Clear 6” 0.250” 0.080” 210165 10 12-10 Clear 6” 0.365” 0.100” WIRE TUBING MINIMUM

E10-22 REVISED OCTOBER, 2018

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.