Sosmetal Products, Inc. 2026 Product Catalog

BONDED ABRASIVES TOOLS & SHOP SUPPLIES

SOSMETAL PRODUCTS INC.

TYPE 27 DEPRESSED CENTER GRINDING WHEELS

THOR grinding wheels are formulated to deliver the highest possible productivity and performance, whether it is used for beveling, weld or edge grinding applications. • Special aluminum oxide grain. • Externally reinforced with fiberglass layers to provide ultimate safety. • Fast, burr-free cutting. • Specifically designed for use on right angle grinders.

Made in USA

• GRINDING APPLICATIONS • These wheels are for general purpose grinding where metal needs to be removed.

PSSZT010512

UNHUBBED

HEX HUB

SIZE

SIZE

“A” “B” “C”

MAX GRAIN/

PART

“A” “B”

“C”

MAX GRAIN/

PART

DIA. WIDTH BORE RPM GRIT

USE

NUMBER QTY

DIA. WIDTH BORE RPM GRIT NUMBER QTY 4-1/2 1/4 5/8-11 13,300 A24N Ferrous Metals, Fast Cut 811705 25 4-1/2 1/4 5/8-11 13,300 A24R Ferrous Metals, Long Life 811706 25 4-1/2 1/4 5/8-11 13,300 AL36N Aluminum, Brass, Copper 811716 25 • 7 1/4 5/8-11 8,500 A24R Ferrous Metals, Long Life 811707 25 7 1/4 5/8-11 8,500 AL36N Aluminum, Brass, Copper 811715 25 • • NOT SOS LABEL USE

5/8 15,000 A24N Ferrous Metals, Fast Cut 811693 25 7/8 13,300 A24N Ferrous Metals, Fast Cut 811694 25 7/8 13,300 A24R Ferrous Metals, Long Life 811695 25 7/8 13,300 AL36N Aluminum, Brass, Copper 811696 25 7/8 12,200 A24N Ferrous Metals, Fast Cut 811711 25 • 7/8 12,200 A24R Ferrous Metals, Long Life 811697 25 7/8 8,500 A24N Ferrous Metals, Fast Cut 811713 25 • 7/8 8,500 AL36N Aluminum, Brass, Copper 811714 25 •

4

1/4

4-1/2 1/4 4-1/2 1/4 4-1/2 1/4

5 5 7 7

1/4 1/4 1/4 1/4

• NOT SOS LABEL

• GRINDING/CUTTING APPLICATIONS • These wheels are specifically designed to do combination cutting and light grinding within the same application eliminating the need to change wheels or tools. Primarily used in the pipeline industry.

D14 D13 D12 D11 D10A SIZE “A” “B” “C” MAX GRAIN/

PART

DIA. WIDTH BORE RPM GRIT

USE

NUMBER QTY

4-1/2 1/8

7/8 13,300 A30R Ferrous Metals, Long Life 811717 25 • 7/8 10,200 A30R Ferrous Metals, Long Life 811718 25 •

6

1/8

• NOT SOS LABEL

DIAMOND CUT-OFF/GRINDING WHEELS Grinding, deburring, surface prep and cutting.

5/8-11 REUSEABLE ADAPTER

• Lasts 20X’s longer than regular grinding wheels. • Cuts faster. • Low odor & debris. • Allows access in hard-to-reach areas. PART DIA. MAX NUMBER (INCHES) GRIT ARBOR RPM 815005 2” 36 1/4” attached 30000

For Right Angle Grinders Fits both Type 27 & 1 Wheels with 7/8” Hole. Part No. 822000

PSS041118

DIAMOND TYPE 27/29 DEPRESSED CENTER GRINDING WHEELS Unique technology that allows a high concentration of diamonds to be solidly bonded to a steel surface for grinding metal.

• Diamonds, the hardest natural material gets the job done quickly and efficiently. • Outperforms Others – last 50-60 times longer than standard grinding wheels. • Cost Efficient, fewer purchases over time. • Less Down Time – no need to have the operator changing wheels. • Promotes longer tool life – no abrasive debris and minimum dust. • Super Safe – eliminates breakage, cracking and failure. • Reduced Vibration, sparks and odors. • Not Effected by exposure to water. • Use On high and low carbon steel, ductile iron, rail track, cast iron, alloys, stainless steel, pipeline application and foundry castings. LONG LASTING – HIGH PERFORMANCE

Regular Abrasive Wheel

Diamond

PART

DIA.

MAX RPM

NUMBER (INCHES) GRIT

ARBOR 1/4 Hub*

3”

36 24 36

30000

815006 815002 815004 815012

4-1/2” 4-1/2” 4-1/2”

5/8-11 Hub* 13300 5/8-11 Hub* 14000

40/50 5/8-11 Hub* 13300

* Removable hub for 7/8” arbor

* Additional sizes are available on a special order basis. Call for information.

PSS071917, PSS041118

D10A-10 REVISED MAY, 2018

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.