Sosmetal Products, Inc. 2026 Product Catalog

SOSMETAL PRODUCTS INC.

CHEMICALS

BULK CHEMICAL ACCESSORIES

AUTOMATIC CHEMICAL DOSING SYSTEMS

C11 C12 C13 C14 C15 C10 C16 C17 C18 C19 C20 C21

The pump accurately doses exact amounts of product, so there is no waste or guesswork. Typical applications are drains, cooling towers, boilers and lift stations. Use this pump for dispensing of Drain Punch #211513 and Hyzymes #44476.

* When dispensing D’Limonene products, use Part No. 44493 Viton Squeeze Tube Assembly, Use Part No. 44494 EPDM Squeeze Tube for Hyzymes or products without D’Limonene (Both Products Are Sold Separately).

DRAIN MAINTENANCE PUMP/DISPENSER • PLUG IN •

DRAIN MAINTENANCE PUMP/DISPENSER • BATTERY OPERATED • • Peristaltic pump with transaxle technology and Sekoflex tube provide excellent chemical compatibility and resistance to mechanical wear. • Industry standard timer for intuitive programming of up to 48 dosings per day. • (8) D cell batteries combined with low consumption motor offer actual pump run time in excess of 50 hours on one set of batteries. TECHNICAL DATA • Uses 8 D cell batteries (not included) (for batteries order #812908 ) • No. of feeds/24hours max: 8 • Flow Rate: (3.25 oz./min., 1.3 gallon/hour)

• Timed dosing digitally set or measured by calibration. • Digital display - easy to see. • Automatic switching to accept 100 - 240 VAC. • Set up to 48 daily operations.

Part No. 44473

Part No. 44400

TECHNICAL DATA • Power 100-240 VAC

(PSS081814.1&2.REV050925)

(PSS081814.1&2.REV050925)

• No. of feeds/24hours max: 48 • Flow Rate: (3.2 gallon/hour) • Relay Function: Pump After/before-alarm

• Pressure: 14.5 PSI • Consumption: 3.5W

EXTENDED BATTERY LIFE!

7 GPM SIPHON PUMP

PLASTIC DRUM PUMP

• Universal. Fits all sizes of drums and pails from 5 gal. up to 55 gal. • 8 oz. per stroke. • Complete with adapters to change stroke output to 4 oz. or 2 oz. • Polyethylene will not rust or corrode. • Fits 3/4" and 2" drum openings, and 5 gal. pails with Rieke Senior Spout.

• 7 GPM pump for use on 55 gal. drums. • Recommended for use with: water based

fluids, detergents, soaps, waxes, antifreeze and some mild acids.

WARNING: DO NOT use with flammable liquids or concentrated acids. DO NOT use with fluids over 140 degree(s) F.

Part No. 211270

Part No. 211260

HEAVY-DUTY BARREL PUMP

METAL DRUM PUMP

• 2-piece telescoping suction tube fits 30 to 55 gal. drums. • Pump delivers a full 10 oz. of fluid per stroke. • Discharge spout thread fits all garden hose fittings. • Premium powder coated steel pump body with ribbed section aluminum die-cast pump head for maximum strength. • Complete with a standard 1-1/2" and 2" bung adapter, tough all steel foot valve and piston valve. • Rugged epoxy finish pump assembly. • Plated steel lever handle with rubber grip for convenience. • Wear-resistant brass piston rings fitted onto zinc die-cast piston. DRUM FAUCETS For dispensing liquids from bulk containers. Part No. 211268 RECOMMENDED for use with oil-based fluids.

• Self priming. • 22 ounces per stroke. • Universal use. • For use with 20, 35 or 55 gallon drums.

22 ounces per stroke

CAUTION: NOT to be used in flammable or explosive material or liquid. NOT UL approved.

Part No. 211247

DRUM PLUG WRENCHES

Easily opens steel, fibre, and plastic drums.

• Universal fit - all plug types. • 15-1/2" length - and knuckle clearance.

• Built-in flame arrestor - safe for flammable or non-flammable liquids. • Brass body - eliminates sparks. • Accepts padlocks - prevents unauthorized use. SAFETY FAUCET - Part No. 211478 SELF CLOSING FAUCET Part No. 211479

PART

USED FOR

CONSTRUCTION

NUMBER 211482 non-flammables only ductile iron 211484 flammables or non-flammables manganese - bronze alloy

Similar to above but for non flammable liquids only.

Do not use either with acids, high alkalines or chlorinated solvents.

C14-7 REVISED MAY, 2025

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.