Sosmetal Products, Inc. 2026 Product Catalog

LUBRICANTS CHEMICALS

SOSMETAL PRODUCTS INC.

TOOL COOLANT

METAL-ICE CUTTING FOAM

TOP TEN SELLER • Increases tool life up to10 times longer than ordinary oils. • Reduces thermal expansion creating more accurate hole sizes. Excellent when tapping, reaming, drilling & threading. • Foaming action stays on cutting area - Foam runs up drills keeping them cool while continuing to feed cutting area. Eliminates

A fast acting coolant that extends the life of drill bits, taps, mills and reamers. • Quickly eliminates heat at it’s source. • Insures clean and smooth cuts. • Does not burn

C10

and decompose. • Non-flammable. • No sticky residue.

dripping, messy oil and cleanup.

NOT RECOMMENDED FOR ALUMINUM

Part No. 811244 (12) 16.75 oz. net wt. (474g)

Part No. 211226 12 18 oz. (1 lb. 2 oz.) net wt. (510g)

LUBRIPLATE AIR TOOL LUBRICANT Recommended for rotor and

CUTTING FLUID Recommended for use on all types of metal cutting, tapping, drilling, reaming and associated applications. • Super concentrated. • No run formula. • Extends tool life. • Yields a super smooth machined finish.

reciprocating types of air tools. Apply daily, or use an automatic lubricator in air system.

• Prevents build-up of moisture, contaminants, sludge & varnish when used on a regular basis.

Part No. 811250 4 oz. net wt.

C15 C14 C13 C12 C11 Part No. 711768 32 fl. oz. BLASTER AIR TOOL CONDITIONER Rejuvenates "DEAD" air tools. • Dissolves sludge, varnish and calcium. • Restores original RPM's. • Reduces maintenance time. • Extends air tool life. Part No. 211104 (12) 12 oz. net wt. Aerosol LOCK EASE Graphited Lock Fluid • Seals out moisture, protects against freeze-up. • Prevents sticking, guards against rust & corrosion • Graphite formula will not gum up. • Leaves a penetrating, protective coating.

TAPMATIC CUTTING FLUID

For tapping, drilling, reaming, threading, finishing and boring.

PART surface finish, without galling or friction. • Built-in spout tops on both size cans. • Contains no ozone depleting chemicals. CONTAINER SIZE • Available in one formulation, for all metals including aluminum. • Penetrates to the cutting edge of the tool. • Produces finer chips and superior

NUMBER 811240 811241

4 oz. can 16 oz. can

WHITE LITHIUM GREASE

Recommended for gear shift mechanisms, chain and sprockets, motor assembly, tools, machinery, etc.

• Available in sizes to fit all shop needs. • Keeps surfaces friction free. • Non-toxic, non-flammable, non-staining. • Temperature range, - 30°F to +170°F. • Withstands moisture, protects against rust.

PART

NET CONTAINER

NUMBER 711756 211131 211132

WEIGHT 1-3/4 oz. 10 oz. 16 oz.

tube tube tub

Part No. 211343 3.5 oz. net wt. Aerosol

CUT-EASE STICK LUBRICANT

MULTI-PURPOSE LITHIUM GREASE Recommended for chassis, universal joints and general purpose use. • Long lasting, hard working formula. • Delivers high performance in a wide range of heavy-duty applications. • Best for lubricating rolling parts.

Use on grinding wheels, bandsaw blades, saw blades, end mills, and drills.

• Provides smoother cuts. • Stops binding. • Reduces loading. • Extends wheel life. • Eliminates heat build-up. • Used on aluminum,

• Cut-Ease is a blended wax stick used where circulating lubricants are not used. • Non-staining. • No solvent waste disposal.

C10-4 REVISED JANUARY, 2018 C20 C19 C18 C17 C16 C21 Part No. 211516 1 lb. ferrous and non-ferrous metals, plastic and more. • Push button tube.

Excellent for most metal to metal contact points!

Part No. 211455 10 14 oz. net wt. cartridge

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.