Sosmetal Products, Inc. 2026 Product Catalog

SOSMETAL PRODUCTS INC.

HOSE CLAMPS FITTINGS/HYDRAULICS/HOSE

WAVESEAL360 TM SELF-ADJUSTING HOSE CLAMPS These clamps are comprised of two main parts, the clamp assembly and the wave profile SmartLiner ® . The wave profile SmartLineris high quality, thin gauge stainless steel specifically tempered to expand & contract with temperature variations. The clamp rides on SmartLiner so pressure is more evenly distributed around the hose.

“2” EAR CLAMPS

B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20 B21

A medium pressure clamp used on rubber hose, plastic tubing, coaxial and electrical cable, rope, etc. l One piece design offers a

Note: When ordering your 2-Ear Clamps select nominal clamp size nearest to, but always larger than, O.D. of material to be clamped after insert has been fitted. * Contained in Assortment NOMINAL WIDTH NUMBER SIZE (INCHES) QTY 102175 5/32 .138 25 102176 11/64 .138 25 102177* 3/16 .197 25 102178* 1/4 .236 25 102179* 5/16 .276 25 102180* 3/8 .276 25 102182* 1/2 .276 25 102183* 9/16 .295 25 102184 19/32 .315 25 102185* 5/8 .315 25 102186* 3/4 .335 25 102187 13/16 .354 25 102188* 7/8 .354 10 102189* 15/16 .394 10 102190* 1 .394 10 102191 1-1/16 .394 10 102192 1-1/8 .394 10 102193 1-3/16 .394 10 102194 1-5/16 .394 10 102195 1-7/16 .394 10 102196 1-1/2 .394 10 102197 1-5/8 .394 10 102198 1-3/4 .394 10 PART

positive tamperproof seal without damage to hose.

l Widely used for maintenance and OEM applications, and on heavily vibrating equipment. l Suitable for low pressure hydraulic applications. l Zinc plated 1010 carbon steel. l Assures adequate closure and compensates for tolerance variations in hose sizes.

MATERIAL SPECIFICATIONS Screw: 5/16” hex head, 410 Stainless Housing: 300 Stainless Band: 9/16”, 300 Stainless 9/16” Spring Linger: 300 Stainless Installation Torque: 70 in-lbs (8 Nm) SELF-ADJUSTING CLAMP Wave Seal design keeps constant pressure during thermal cycling to prevent cold temperature leaks. COST EFFECTIVE Cost affective alternative to conventional T-bolt, spring style, Belleville and high torque hose clamps in many applications. DUAL BEAD DESIGN Concentrates sealing pressure to prevent leaks and will not damage softer hoses. Rolled edges won’t cut into the hose Outperforms T-bolt and spring clamps in leak testing and pull-off testing.

LOW PROFILE CLAMP Compact design is ideal for use in engine compartment and other applications where space is limited. ULTRA LIGHT WEIGHT 1/3 the weight of traditional constant torque hose clamps. 100% STAINLESS STEEL CON STRUCTION Excellent corrosion resistance clamp. FOR USE ON Radiator, heater, charge air (turbo) and cooling systems, heat exchangers, hydraulic systems and other fluid and air conducting.

PSS100218

Part No. 501559 156 pieces • 12 items 12051 steel tray

Numbers in assortment 102001 102177 102178 102179 102180 102182

102183 102185 102186 102188 102189 102190

PSS100218

PART

CLAMPING RANGE

SAE SIZE

BAND

NUMBER MIN - MAX

MIN - MAX

WIDTH QTY

28mm - 33mm 1-3/32 - 1-5/16 16 29mm - 40mm 1-1/8 - 1-9/16 20 36mm - 43mm 1-7/16 - 1-3/4 22 3 8mm - 46mm 1-1/2 - 1-13/16 24 43mm - 52mm 1-3/4 - 2-1/16 28 48mm - 59mm 1-15/16 - 2-5/16 32 50mm - 62mm 2 - 2-1/2 34 53mm - 65mm 2-1/8 - 2-9/16 36 58mm - 71mm 2-5/16 - 2-13/16 40 63mm - 78mm 2-1/2 - 3-1/16 44 67mm - 84mm 2-11/16 - 3-5/16 48

9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16

103600 103601 103602 103603 103604 103605 103606 103607 103608 103609 103610

5 5 5 5 5 5 5 5 5 5 5

NORMA TORRO ® (European Style) l Short housing saddle for a smooth underside ensuring high sealing efficiency. l Stainless steel band & housing, Zinc & Yellow steel screw. l Unique off set non-welded design of the housing provides resistance to over-tightening damage to the hose. l Original equipment on both domestic and import vehicles. l DIN 3017. Used for fuel, vacuum, water, emission and heater hoses.

PSS100218

100% STAINLESS STEEL MAKE-A-CLAMP ®

PART

CLAMPING RANGE

HEX SIZE 5mm* 5mm* 5mm*

BAND

NUMBER MIN - MAX

MIN - MAX

WIDTH QTY

8mm - 12mm 5/16 - 1/2 10mm - 16mm 3/8 - 5/8 12mm - 18mm 1/2 - 3/4 8mm - 16mm 5/16 - 5/8 12mm - 20mm 1/2 - 3/4 16mm - 25mm 5/8 - 1 20mm - 32mm 3/4 - 1-1/4 25mm - 40mm 1 - 1-5/8 32mm - 50mm 1-1/4 - 2

8mm (5/16) 8mm (5/16) 8mm (5/16)

421205 421206 421207 421208 421209 421210 421211 421212 421213 421214 421215 421216 421217 421218

12 12 12 12 12 12

A unique, multi-purpose “fix-it-kit” for farms, maintenance & repair shops, off road vehicles, motor homes, trucks & buses, construction equipment, and marine. l Reduces inventory-broadens coverage. l Nothing else like it. l Adjustable in diameter from 2 inches to many feet. l Saves costly time-quickly makes exact size.

6mm 9mm (11/32) 6mm 9mm (11/32) 6mm 9mm (11/32) 6mm 9mm (11/32) 6mm 9mm (11/32) 6mm 9mm (11/32)

6 6

30mm - 45mm 1-3/16 - 1-3/4 6mm 9mm (11/32) 6 40mm - 60mm 1-5/8 - 2-3/8 6mm 9mm (11/32) 6 50mm - 70mm 1-31/32 - 2-3/4 6mm 9mm (11/32) 6 60mm - 80mm 2-3/8 - 3-1/8 6mm 9mm (11/32) 6 70mm - 90mm 2-3/4 - 3-9/16 6mm 9mm (11/32) 6 6

Clamp is closed & tightened in conventional manner.

Slotted fastener engages with band.

Each kit contains: 1. Slotted fasteners. 2. Screw housing assemblies. 3. Band splices. 4. Roll of perforated band.

* Phillips Hex Drive

Band is cut to required length.

Part No. 501508 62 pieces • 11 items 12050 steel tray

Screw assembly engages with band.

PSS100218

MAK-A-CLAMP KITS & REFILLS

421212 421213 421214

421215 421209 421210

421211 421205 421206

421207 421208

PART KIT CONTAINS

PART REFILL CONTENTS

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner. Mak-A-Clamp ® is a registered trademark. * Each adjustable fastener includes 1 slotted fastener and 1 screw housing assembly. NUMBER NUMBER 10240 Shop Kit - containing 50 ft. (15.2m) 10242 box of 10 band, 10 adjustable fasteners* adjustable and 5 band splices. fasteners*. 10241 Tool Box Kit - with 8.5 ft. (2.6m) 10243 box of 10 band, 3 adjustable fasteners*, band splices. 1 band splice.

Numbers in assortment

Flexible Nut Driver For 6mm hex fits European Style Hose Clamps No.’s 421208 thru 421215 Part No. 213135

B12-3 REVISED NOVEMBER, 2018