Sosmetal Products, Inc. 2026 Product Catalog

SOSMETAL PRODUCTS INC.

FASTENERS & HARDWARE

OUR UNI-TAP ® and HOLLOW WALL ANCHORS

UNI-TAP ® A unique nylon fastener that can be used in a variety of substrates. UNI-TAP ® eliminates ice build-up, a common occurrence on the head of metal fasteners in refrigerated trucks and equipment.

A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21

l Low cost, tamper resistant, vibration resistant, non-corrosive, sanitary, FDA approved. l Withstands temperatures from -60° F to 425° F. l High shear and tensile strength. Can withstand the impact of hammer installation and still hold firmly in place.

To Install: Drill a .281 size hole (K or 9/32 drill bit) Insert UNI-TAP ®

And hammer into place

UNI-TAP ® WORKS IN:

l Brick l Plastic l Plexi-glass

l Metal l Foam Insulation l Sanitary Wall Systems

l Wood l Concrete l Block

USE UNI-TAP ® FOR: l Trailer liners, Truck panels, Refrigerated trucks, Reefers, Cold storage facilities, Food processing plants, Restaurants, Food preparation facilities l Electrical control panels and boxes l Telecommunications l Building and housing construction, wall and roof insulation l Plumbing and heating installations l Display signs

All Sizes 5/8”

1/8”

See Chart

Part No. 501641 180 pieces • 5 items 12061 steel tray

HOLLOW MATERIAL

PULL OUT CEMENT

PULL OUT HOLLOW

PART

GRIP

HEAD

NUMBER 507395

SIZE 1/4x1

RANGE SHEAR (LBS.) BLOCK (LBS.) WALL (LBS.) STYLE QTY

3/16 to 1/2

250 253 274 238 228

150 158 154 163 150

130 130 130 130 130

Truss Truss Truss Truss Truss

100 100

507395 507396

507397 507398

507399

507396 1/4x1-5/8 3/8 to 1-1/8 507397 1/4x2-1/8 7/8 to 1-5/8 507398 1/4x2-5/8 1-3/8 to 2-1/8 507399 1/4x3-1/8 1-7/8 to 2-5/8

50 50 50

Numbers in assortment

TOGGLER ® TOGGLE BOLTS When the application is critical use Toggler ® Toggle Bolts, the strongest anchor available.

Toggler ® Toggle Bolts for maximum strength & precision alignment in:

Four easy steps to total anchoring security!

l Hollow Block l Hollow Brick l Drywall

l Cinder Block l Stucco l Paneling

l Concrete Block l Plaster l Fiberglass

l Cement Board l Boat Decks l Composite Panels

l Easy to use - pre-installs without bolt. l Strongest toggle bolt available - size for size. l Accurate - rugged pre-installation mechanism centers metal channel in small hole, before bolt insertion. l Quick - can be used with a screw gun. l Cost effective - turn 2 person job into 1 person job. l Get job done faster - save 6 minutes per anchor compared with old-fashioned methods. l Convenient - enables removal of bolt/fixture without anchor falling behind wall. l Most reliable - will not damage or break through wall even when vibrated. l Ideal for heavy loads in hollow walls, ceilings and floors. l Grip range 3/8” to 3-5/8” wall thickness. l Toggle is zinc plated, straps and face plate are plastic. l Screw length = 1/2” + wall + fixture thickness. l Screws not included.

Drill appropriate sized hole. Hold metal channel flat alongside plastic straps and slide channel through hole.

With one hand, pull ring or hold ends of straps between thumb & forefinger. Pull toward you until metal channel rests flush behind wall. Slide plastic cap along straps until flange of cap is flush with wall.

Place thumb between plastic straps. Push side ti side snapping off straps flush with wall.

Insert bolt through item to be attached and tighten until flush with fixture. Minimum clearance behind wall: 1-7/8”.

3/16” & 1/4” Snap Toggle

3/8” & 1/2” Toggler

TENSILE PULL-OUT VALUES: LBS. AND (KG)

PART

5/8” (16mm) DRYWALL

CONCRETE BLOCK 714 (325) 925 (420) 1,167 (530) 2,038 (926)

1/2” (13mm) STEEL PLATE 918 (417) 1,283 (583) 1,425 (648) 2,392 (1,087)

HOLE SIZE

GRIP

NUMBER QTY

SIZE

RANGE

3/16-24 356 (162) 1/4-20 306 (139) 3/8-16 576 (262)

1/2 1/2 3/4 3/4

507388 507389 507390 507391

10 10

3/8 - 3-5/8 3/8 - 2-1/2

5 5

1/2-13

N/A

Tests are ultimate load, industry safety standards recommend 1/4 of the values for actual application. Age and condition of wall material will cause tensile values to vary.

LIGHT & MEDIUM DUTY ANCHORS

l Includes: nylon anchors, sheet metal screws, toggle wings and bolts. Used in plaster, wallboard, wood, masonry, concrete block, metal, and tile.

Part No. 501599 520 pieces • 15 items 12051 steel tray (with dividers)

Numbers in assortment 27111 27119 27128 27146 408501 408502 408503 408504

507101 507102 507103 507105

507106 507116 507117

A21-3 REVISED OCTOBER, 2012

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.