Sosmetal Products, Inc. 2026 Product Catalog

SOSMETAL PRODUCTS INC.

FASTENERS & HARDWARE

LINKS, CHAIN and WIRE ROPE HARDWARE

REPAIR AND LAP LINKS For temporary chain repair and coupling of attachments. DO NOT USE FOR OVERHEAD LIFTING

EYE AND EYE SWIVELS

A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21

l Drop forged carbon steel. l Galvanized for additional corrosion resistance.

PART WORKING SIZE NUMBER LOAD LIMIT (LBS.) † 1/4 521277 850 5/16 521278 1250 3/8 521279 2250 1/2 521280 3600 5/8 521281 5200 3/4 521282 7200 7/8 521283 10000 1 521284 12500 1-1/4 521285 18000

l Low steel.

l Design factor 5 to 1. l Meets federal spec.

Protected by BLU-KROME™ against rust & corrosion

PART

WORKING

RR-C-271-Type VII Class 2.

SIZE

NUMBER QTY LOAD LIMIT (LBS.) †

1/8 x 3/4 3/16 x 1

190 240 400 950

52224 52217

6 6 6 6 6 6 6 6

1/4 x 1-1/4 52218 5/16 x 1-1/2 52220 3/8 x 1-5/8 52221 1/2 x 2-1/2 52222 5/16 x 2* 52227 3/8 x 2 52228

1000 1250 1250 2125

DOUBLE CLEVIS Use with proof coil chain & high test chain.

COLD SHUT For temporary chain repair and coupling of attachments. DO NOT USE FOR OVERHEAD LIFTING

l Forged, heat treated, tempered steel. l Easy to install and remove.

Protected by BLU-KROME™ against rust & corrosion

l Mild steel. l Use one size larger

CHAIN

PART

WORKING

when used with chain.

PART WORKING SIZE NUMBER QTY LOAD LIMIT (LBS.) † 3/16 521242 2 450 1/4 52131 2 750 5/16 52132 2 1250 3/8 52133 2 1900 7/16 52134* 2 2650 1/2 52135 2 3500 5/8 52136* 1 4500 3/4 52137* 1 6900 *This item will be discontinued when stock is depleted.

SIZE

NUMBER

LOAD LIMIT (LBS.) †

l Do not reuse.

1/4 or 5/16 52179 7/16 or 1/2 52181 3/8 52180

3900 5400 9200

Protected by BLU-KROME™ against rust & corrosion

WIRE ROPE CLIPS MALLEABLE IRON

l Malleable iron casting meets ASTM A-47 specification. l Clips meet specification FF-C-450, TYPE L, CLASS 2. l Complete with hex nuts.

PART SIZE NUMBER QTY 1/8 52145 10 3/16 52148 10 1/4 52149 10 5/16 52150 10 3/8 52151 10 1/2 52152 2 5/8 52153 2 3/4 52154 1 7/8 52155 1 1 52156 1 PART SIZE NUMBER QTY 1/8 521232 2 3/16 521233 2 1/4 521234 2 5/16 521235 2 3/8 52157 2 1/2 52158 2 5/8 52159 2 3/4 52160 1 7/8 52161 1 1 52162 1 1-1/8 521236 1 PART SIZE NUMBER QTY 1/8 52201 6 3/16 52202 6 1/4 52203 6 5/16 52204 6 3/8 52205 6 1/2 52206 6 5/8 52207 6 3/4 52208 6 7/8 52209 6 1 52210 6

QUICK LINKS Use as a repair link, connecting link, or attaching device.

l Reusable l Fast and easy-no tools needed. l Nut screws into place.

Protected by LUSTERPLATE™ against rust & corrosion

Protected by LUSTERPLATE™ against rust & corrosion

l Threaded end diameter exceeds link diameter to prevent deformation or breakage of threads under stress.

PART WORKING SIZE NUMBER QTY LOAD LIMIT (LBS.) † 1/8 52211 6 180 3/16 52212 6 750 1/4 52213 6 1250 5/16 52214 6 1900 3/8 52215 6 2650 1/2 52216 6 4500

FORGED CARBON STEEL

l Galvanized for added corrosion resistance. l Meets specification FF-C-450,type l, class 1 l Complete with heavy hex nuts.

ALUMINUM CABLE FERRULES & STOPS

CABLE PART SIZE NUMBER QTY 1/16 521316* 5 3/32 521317* 5 1/8 521318* 5 3/16 521319* 5 1/4 521320* 5 *Set of (5) Ferrules & (5) Stops

WIRE ROPE THIMBLES

l Made of hot rolled mild steel. l Meets federal specification FF-T-276b, type ll. l Galvanized for added corrosion resistance.

Swage tool No. 2 Sizes 1/16 to 1/8

Part No. 521321

Swage tool No. 3 Sizes 1/8 to 1/4

Part No. 521322

18" Swage tool Sizes 1/16 to 3/16

Part No. 521323

†

WARNING:

Do not exceed working load limit

A20-5 REVISED MAY, 2022

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.