Sosmetal Products, Inc. 2026 Product Catalog

SOSMETAL PRODUCTS INC.

FASTENERS & HARDWARE

DRILL N’ TAP SCREWS (TEKS ® ) and DRILL POINT SCREWS

ROCK-ON FLAT PHILLIPS DRILL N’ TAP SCREWS (TEKS ® ) HIGH PERFORMANCE RIB HEAD DESIGN!!!

A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21

l Rib design under head countersinks into dense material while preventing stripouts. l Two point types for steel and wood applications. l Larger head diameter increases board surface contact for greater pullover resistance.

l #8 fastener has self-drilling point and standard thread. l #9 fastener has pointed tip and dual-spaced thread. l Head designed to countersink into any high-density panel, including cement board, tile backer board and plywood. l Thread design provides improved pull-out resistance.

Protected by CLIMACOAT against rust & corrosion

Cement-type boards steel any dense sheathings to steel or wood studs.

Wire lath to steel or wood studs.

Plywood to steel or wood studs.

Brick ties to or or wood studs.

HI-LO ® PART NO. DIA.xLENGTH MATERIAL ATTACHMENT RANGE

APPLICATIONS

505985*

9 x 1-1/4 Up to 3/4” material thickness to wood; 3/8”-1” material thickness to steel 9 x 1-5/8 Up to 1-1/8” material thickness to wood; 3/8”-1-3/8” material thickness to steel 9 x 2-1/4 Up to 1-3/4” material thickness to wood; 1” to 1-7/8” material thickness to steel

Cements board to wood or light gauge steel 26-20 gauge

505986

505987

TEK ® PART NO. DIA.xLENGTH MATERIAL ATTACHMENT RANGE

APPLICATIONS

505980* 505981 505982

8 x 1-1/4 3/8” to 3/4” material thickness 8 x 1-5/8 3/8” to 1-1/4” material thickness 8 x 2-1/4 1” to 1-7/8” material thickness

Cements board to steel studs 20-12 gauge

* Fully threaded.

WALL LINER TORX ® DRILL N’ TAP SCREWS (TEKS ® )

Protected by LUSTERPLATE TM against rust & corrosion

DESIGNED EXCLUSIVELY FOR TRAILER AND CONTAINER APPLICATIONS.

l Torx ® drive provides non-slip installation. l Larger wafer head style resists pullout. l Countersinks below plywood surface. l No pre-drilling necessary with Tek point. l Fast and easy one step installation. l Use T-25 torx driver.

SIZE PART DIA.xTHRDxLNGTH NUMBER 10-16 x 1 505970 10-16 x 1-1/4 505971

HEX WASHER HEAD SLOTTED DRILL POINT SCREWS

Protected by LUSTERPLATE TM against rust & corrosion

l Unique drill point speeds penetration and eliminates walking. No need to center punch.

l Hardened steel point — drills its own hole. l Sharp threads prevent over-enlarging hole.

DIA. NO. 6

PART NO. 7 DIA.

PART NO. 8 DIA.

DIA.

NO. 10

Includes Part No. 53510 1/4” hex driver Part No. 53505 201 pieces • 6 items 12032 plastic tray

LENGTH

PART PART NUMBERQTY NUMBERQTY NUMBERQTY NUMBERQTY

53516

---

---

---

3/8 1/2 3/4

200

-

-

-

--- ---

53517

53518

53519 53520

- -

200

200

200 200

---

---

-

-

53510 53516

53517 53518

53519 53520

1/4” hex driver Part No. 53510

1/4” hex driver Part No. 53510

1/4” hex driver Part No. 53510

5/16” hex driver Part No. 53511

Numbers in assortment

A15-9 REVISED SEPTEMBER, 2014

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.