Sosmetal Products, Inc. 2026 Product Catalog

SOSMETAL PRODUCTS INC.

VEHICLE MAINTENANCE MERCEDES

Illustrations are actual size unless otherwise noted.

Smaller than Actual Size

J10 MERCEDES

6

10

12

25

724094 “U” Speed Nuts

725200 Nylon & Metal Retainers Size: 14.5mm x 47mm Overall Length: 43mm Black Phosphate Plated Steel Front & Rear Door OE: 124-988-94-78

724509 Drive Type Rivet Retainers Fits: 7mm Hole

716811 “U” Speed Nuts

Screw Size: 4.2mm (No. 8) Panel Range: .5mm-2.5mm Center Of Hole To Edge: 14mm Zinc & Yellow OE: 123-994-08-45

Screw Size: 6.3mm Panel Range: .7mm-1.5mm Depth: 13mm Center Of Hole To Edge: 13mm OE: 000-994-09-45, 20-72-175, 946-418

Head Dia: 16mm Stem Dia: 18mm Black Nylon

OE: 124-990-04-92

10

10

12

6

725202 Push Type Retainers

725203 Retaining Pins Head Size: 15mm x 15mm Overall Length: 31mm Rear Entry Scuff Plate Black Nylon

724517 Hood Insulation Drive Type Rivets

725201 Push Type Retainers

Fits: 8mm Hole Head Size: 16mm Stem Length: 11mm Black Nylon OE: 000-990-29-92, 000-990-60-92, 001-990-16-92, 114-990-01-92, 1104882, 1268642, 1719245, 9133417

Fits: 6mm Hole Head Dia: 11mm Stem Length: 16mm Black Nylon & Santoprene Rubber

Fits: 8mm Hole Head Dia: 20mm Stem Length: 9.5mm Panel Range: 5mm

OE: 2D1-867-741, A901-988-00-25

OE: 230-990-01-92

OE: 000-991-59-40

12

10

12

725204 Sems Tapping Screws Head Size: 4.8mm-1.61 x 20mm Hex Head Sems Washer OD: 26mm Front Bumper, Moulding Strip OE: 201-990-05-36

724512 Bumper Blind Rivets

725206 Specialty Rivets

12

Rivet Dia: 5/32 (4mm) Head Dia: 5/16 (8mm) Grip Range: .040-.275 (1mm-7.5mm) Leg Retention Style

Rivet Dia: 1/4 (6.3mm) Grip Range: 3/16 To 17/64 Flange Dia: 1/2 Steel Rivet/Mandrel OE: 004-990-16-97

725351 Moulding & Trim Fastener

Overall Height: 22mm Black Spring Steel

OE: 001-991-76-70

OE: 003-990-94-97

25

723331 Trim Panel Retainer Top Head Diameter: 14mm Middle Head Diameter: 15mm Bottom Head Diameter: 18mm

Stem Diameter: 9mm Stem Length: 15mm White Nylon

OE: 000-991-71-71

J10-223 REVISED FEBRUARY, 2023

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.