Sosmetal Products, Inc. 2026 Product Catalog

SOSMETAL PRODUCTS INC.

VEHICLE MAINTENANCE

NISSAN / INFINITI

Illustrations are actual size unless otherwise noted.

25

12

10

10

716857 Screw Grommets

716864 Screw Grommets Fits: 8.5mm Square Hole Stem: 17mm Head Dia: 18mm Screw: 5mm OE: 01281-00023, 90189-06001, MB-098145

724030 Screw Grommets Fits: 8.5mm Square Hole Flange: 16mm Overall Length: 11mm Panel Range: 1.5mm

717611 Screw Grommets

Fits: 8mm Square Hole Stem: 17mm Head Dia: 16mm Screw: 4mm OE: 90661-SC7-003, 01651-00481, 74798-S9000, 90189-06042, H001-50-841, MS-480012

Fits: 7mm Square Hole 9.5mm W x 9.5mm L

Screw: 4mm White Nylon OE: 75522-611-0000, 97606-B0700, 9991-00-412, MS-480001

OE: 01281-00831

10

10

10

10

725294 Screw Grommets w/Sealer Head Size: 15mm x 19mm Stem Length: 16mm Screw Size: 6.3mm-1.81mm (No. 14) Brown Nylon OE: 01553-2U001, 26557-2U001

716818 Extruded “U” Nuts

725292 Screw Grommets w/Sealer Head Size: 16mm Stem Length: 20mm Screw Size: 4.2mm (No. 8) Natural Nylon OE: 01281-00691

725293 Screw Grommets w/Sealer Head Size: 9.5mm x 9.5mm Stem Length: 16mm Screw Size: 3.5mm (No. 6) White Nylon OE: 01281-00501

Screw Size: 5mm Depth: 15mm Fender Wheel & General Usage Black

723186 Black Nylon Engine Under Cover, Bumper, Wheel Apron & Hood Trim Push-Type Retainer Head Diameter: 18mm Stem Length: 10mm (Excluding the Pin) Fits into 8mm Hole OE: 90467-08185; 01553-09611; 1006521-00-A 7

5

7

10

NISSAN/

INFINITI

720637 Drive Type Retainers

723096 Front Bumper Nylon Nuts

725279 Nylon “U” Nuts Panel Range: Up To 4mm Captive Metal Hex Nut: 6mm Center Of Hole To Edge: 14mm Black Nylon OE: 01241-00881

Fits: 8mm Hole Head Dia: 20mm Stem Dia: 9mm Black Nylon OE: 01553-09321, MR328954

Head Dia: 16mm Stem: 11mm Screw Size: 5.5mm (No. 12) Natural Nylon OE: 62319-0W000

10

25

15

15

718711 Screw Type Rivet Retainers Fits: 6mm Hole

718672 Screw Type Rivet Retainers Fits: 5/16 (8mm) Hole Head Dia: 43/64 (17mm) Stem Dia: 23/32 (18.3mm) Front Compartment & Spare Tire OE: 20451119, 63844-01A99

718710 Screw Type Rivet Retainers Fits: 1/4 (6mm) Hole

724250 Drive Type Rivet Retainers Fits: 8mm Hole

Head Dia: 15mm Stem Dia: 11mm Black Nylon

Head Dia: 9/16 (14mm) Stem Dia: 5/8 (16mm)

Head Dia: 20mm Stem Dia: 8mm Black Nylon

Cowl Panel To Reinforcement OE: 94051993, 66860-01W01

OE: 90684-SA5-003, 10998-30880, 894-298-1190

OE: 91545-SE0-003, 63848-01G00-A

J10-213 REVISED SEPTEMBER, 2023

© Copyright 2026.All rights reserved. No portion may be copied or reproduced in any manner.