2026 Industrial MRO Catalog

TOOLS & SHOP SUPPLIES

WELD IN G A CCESSOR I ES and S UPP L I ES

SPARK LIGHTER

SOAPSTONE AND HOLDER

• Large 1 square inch file area. • Large diameter spark flint. • Cartridge holding flint locks exactly into position.

• For marking cutting lines and weld areas.

PART

DESCRIPTION

NUMBER 412213

QTY

PART

DESCRIPTION

Round aluminum soapstone holder with pocket clip & one soapstone

NUMBER 412211 412212

QTY

Spark lighter Replacement flints

Soapstone refills

412214

6

6

ANTI-SPATTER DIP GEL • Leading water based gel.

• Prevents weld spatter adhesion on any surface. • No ozone depleting chemicals. • No silicones, fluorocarbons, or methylene chloride. • Flash point above 250° F. • 11 oz. net wt. (311g) Contents 20 fluid oz. • “WET” Spray formula. • Paintable. • Non-Flammable. • 3X’s more active ingredients than other brands. Part No. 812610 ANTI-SPATTER Use on MIG nozzles, contact tips, electrode holders, fixtures, welding tips and wheels. PSS020320.812610 (REV120120)

• Reduces build up on nozzles and tips. • Excellent cooling properties for longer tip and nozzle life. • Can dip hot or cold.

• Gel will not migrate into liner. • Non-flashing, biodegradable, paintable and non-toxic. • 16 oz. jar

PSS020220

Part No. 812609

WELDING BLANKETS

HEAVY DUTY WELDING GLOVES • Heat resistant.

Use for general purpose welding, sparks and spatter. • 35 oz. (industry standard) white fiberglass-no coating. • 1000°F melting temperature. • .08” thick, grommets on 18” centers. • Locked stitched with heat resistant fiberglass thread.

• 4-1/2” heavy safety cuff. • Heavy top quality leather - palm, back, fingers, cuff. • Fully lined. • Wing thumb. • Gunn pattern. • Seamless back. • 12-1/2” overall length.

PART

DESCRIPTION

NUMBER 412240

6 ft x 6 ft

WARNING: Temperature and applications intended as a guideline only and implies no guarantee of performance. All blankets are subject to burn through. The product only pro vides temporary protection within their individual specifications. It is the users’ responsibility to monitor the activity and use of the product at all times.

D14 D13 D12 D11

Part No. 312113

COOL GEL ® HEAT BARRIER SPRAY

Helps protect surfaces during soldering, brazing and welding.

• Thick gel formula heat barrier spray - stays where it is sprayed! • Reduces danger of fire to surrounding surfaces. • Protects adjoining areas made of wood, wallboard, insulation, etc. • Safe, non-toxic, harmless to skin and odorless. • Non-corrosive, non-staining, no drips or runs. • Easy clean up - wipe off excess when the job is done - or - wait 48 hours & it evaporates.

Part No. 44409 Trigger sprayer - quart size (32 oz.)

PSS031111

• Each canister provides air tight storage for welding rods. It protects them from moisture, contaminents, and damage. • Constructed of high impact polyethylene - they can be reused for many years. • Threaded cap includes a long lasting neoprene seal. • Great for on-the-go repairs. PAT R I O T WELDING ROD CANISTERS

W E L D ING

M ADE IN THE USA

Part No. 818014 for 14” Part No. 818018 for 18”

Holds up to 10 pounds of welding rods

D13-8 REVISED DECEMBER, 2020

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.