2026 Industrial MRO Catalog

TOOLS & SHOP SUPPLIES

HAMMERS, CHISELS, PUNCHES and PRYING TOOLS

BALL PEIN HAMMERS

DEAD BLOW HAMMER

D10 D12 D11 D14

Sheet metal shops, repair shops, machine tools and gear box construction, tire shops • Recoilless - will not bounce. • Lead shot filled head - increases striking power by 30%. • Polyurethane yellow tips - preserves sensitive surfaces & edges, shatterproof.

• Compression wedged hickory handle for added safety.

• High quality forged steel For strength & long life.

Replaceable tips

Part No. 813748 • Reduces hand fatigue. • Steel tube shaft with rubber hand grip for added comfort. • Hammer weight: 26 oz. • Handle: 12" long • Head approx.1-5/8" x 4-7/8".

PART

HEAD OVERALL WEIGHT LENGTH

PART

HEAD OVERALL WEIGHT LENGTH

NUMBER 813741 813743

NUMBER 813744 813745

4 oz. 12 oz.

10-1/4 12-3/4

16 oz. 20 oz.

13-3/4

15

CLAW HAMMER

RUBBER MALLETS

• 13” overall length. • 16 oz. • Drop forged. • Hardwood handle.

PART

HANDLE

MALLET LBS. COLOR RATED

NUMBER 113525

TYPE

Wooden

Black

2

Part No. 113527

HOLD-DOWN CLIP

PIN PUNCHES

• Forged high grade steel. • Hardened & tempered. • Black lacquer finish.

• For securing to floor or wall.

PART

POINT DIA. LENGTH

PART

POINT

DIA. LENGTH

Part No. 213729 (10)

NUMBER 113368

STEEL

NUMBER

STEEL

1/8

5/16 3/8

6 6

113370 3/16

1/2 1/2

6 6

COLD CHISELS

113369 3/16

1/4

113371

• Forged alloy steel. • Black lacquer finish. • Heads & bits fully polished.

CENTER PUNCHES

• Forged high grade steel. • Black lacquer finish. • Polished heads & tempered.

NOTE: Always use safety goggles when using any chisel or punch.

3/4”

5/8”

1/2”

3/8” 5/16” 1/4”

PART

DIAMETER LENGTH

PART

DIAMETER LENGTH

NUMBER 113360 113361 113362

STEEL

NUMBER 113363 113364 113365

STEEL

PART

DIAMETER LENGTH

PART

DIAMETER LENGTH

1/4 5/16 3/8

5 5

1/2 5/8 3/4

6

NUMBER 113375 113376

STEEL

NUMBER 113377

STEEL

6-1/2

1/4 3/8

3-1/2

1/2

6

5-1/2

7

5

PILOT PUNCHES (For removal of roll or spring pins) • Speed up pin removal, safely. • Center perfectly over pin.

• Eliminate damage to pin or wall of hole. • Drive pin completely through hole without sticking.

Part No. 113582 Contains one each: 1/8” - 5/32”, 3/16” - 7/32”, 1/4” - 5/16”

Each punch has a pilot point that fits into the hollow center of the pin, holding the driving shoulder of the punch in the perfect contact position during the entire removal operation.

MULTI WEDGE™ NON-MARRING PRY TOOLS

Great on plastic, wood, upholstery, glass, fiberglass, painted surfaces! Easily pry bezels, dashes, badges, trim, moldings, door panels, body work, seals and upholstery.

Orange Wedges are made of a softer Polyethylene Material 5230, very slick and smooth surface for a gentle prying applications.

• Made of 2 different materials covering a complete range of applications.

• No other tool has a super thin tip (.005) allowing them to get into super tight gaps. Part No. 113273 Includes 3 of each Orange & Black Tools

PSS072414

Black Wedges are made of a very High Impact Ductile Polycarbonate Material. Designed for tough prying applications.

The 4 in 1

Replaces screwdrivers, pry bars and all other metal tools that can cause damage and marring of delicate surfaces. 1) Pry Tool 2) Level Align Tool 3) Scraper 4) Shim

D11-13 REVISED FEBRUARY, 2017

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.