2026 Industrial MRO Catalog

MISC. ENGINE HARDWARE & HEATER HOSE UNDER THE HOOD SERVICE

SHEET GASKET MATERIAL

L10 L11 L12 L13 L14 L15 L16 L17 L18 L19 L20 L21

PART

SHEET SIZE

MATERIAL

NUMBER 323156 323187 323185

(INCHES)

18 x 36 x 1/16 12 x 20 x 1/16 12 x 36 x 1/8

Flexible Fibre

High Temp Non-Asbestos

HANDY ROLL

Cork

SILICONE HOSE For Maintenance Free Cooling Systems For trucks, buses, off-highway construction equipment, compressors, and generators.

BURST

PART

HOSE LENGTH PRESSURE (PSI)

REPLACES

NUMBER I.D.

SAE J20E PART 1 PUROSIL GATES

OUTLASTS CONVENTIONAL HOSE BY 6 TIMES

2

3 ft. 3 ft. 3 ft. 3 ft.

200 175 150 125 100

70-200 24832 70-225 24836 70-250 24840 70-275 24844 70-300 24848

418312

418313 2-1/4 3 ft. 418314 2-1/2 418315 2-3/4

Color: BLUE

3

418316

l Resists aging, ozone, chemicals, lubricants,hardening, and cracking. l Flexible and resilient at temperatures as low as –65° F. Withstands temperatures to +350° F.

l Cuts operating cost and eliminates down time. l Meets or exceeds operating requirements of SAE J20E, TMC, and OEM truck manufacturers.

$200.00 MINIMUM ORDER OF COMBINED SIZES

RED INSULATED HEATER HOSE Meets OEM & SAE 2 or 3 CLASS D2 SPECIFICATIONS

OEM HEATER HOSE

Available in BLACK or RED

l Compounded to exact original equipment specs - will not soften, flake or swell. l High strength synthetic

l Conquers the ozone problem and assures trouble - free service. l 100% EPDM compound throughout, hose resists anti-freeze, high and low temperatures, abrasion, swelling, flaking and softening. l Unexcelled insulation layer keeps heat inside the hose to provide maximum heater efficiency. l OEM plus insulation layer.

PACKED IN 50 FOOT ROLLS

reinforcement provides strength and flexibility.

PACKED IN 50 FOOT ROLLS

RED PART

BLACK PART

I.D.

l Special EPDM rubber tubing and cover for exceptional performance under extreme temperatures. l Withstands corrosive additives and coolant solutions.

NUMBER NUMBER 60707R 60707B 60705R 60705B 60706R 60706B

PART

SIZE

1/2 5/8 3/4

NUMBER 60709 60710 60711

1/2 5/8

3/4 SILICONE HEATER AND COOLANT HOSE

1

---

60704B

Reduce operating cost & eliminate down time.

Silicone hose is intended for heating systems exposed to constant, high heat such as bus engine compartments, over-the-road and city diesels, or gasoline tractors. These systems must have a fail-safe heater hose system guaranteeing no coolant system failure due to hose problems.

l Durable and long lasting. l Extremely flexible. l OEM spec. for many H.D. trucks. l Construction tube - silicone rubber, specially compounded for long life. l Reinforcement - Braided glass fibers compatible with most anti-freeze. Braid expands for easy assembly to fitting. l Cover - silicone rubber. l Temperature range - (-65°F to +350°F). l Specifications - SAE J20R3 Class A.

Old style EPDM rubber -40°F to +250°F temp. capability (6X Life) silicone -65°F to +350°F temp. capability l Color - Blue. l Up to 10 years service life. PACKED IN 25 FOOT ROLLS

6X Life

BURST PRESSURE

PART

HOSE TYPICAL

SAE J20R3

TMC

MIN. BEND

NUMBER 418301 418302 418303

I.D. VALUES REQUIREMENTS

RADIUS (INCHES)

5/8 3/4

300 300 250

200 200 175

125 125 125

2 3

2-1/2

1

(TMC - truck motor vehicle code)

SURE-FIT™ HIGH-TEMP FORMED HEATER HOSE

l Eliminate kinked & crimped hoses. l Only 4 hoses provide coverage for 2,500 applications. l Over 70 million vehicles use formed heater hose. l Cut and splice to form any shape using nylon hose splicers.

PART

HOSE

LENGTH

Available in 5/8” or 3/4” I.D. Available in 24” or 48” lengths.

NUMBER I.D. 324024 5/8

4 x 90° x 24 4 x 90° x 48 4 x 90° x 24 4 x 90° x 48

5/8 3/4 3/4

324048 324824 324848

4”

Formed 90° bend.

L15-1 REVISED JANUARY, 2018

© Copyright 2026. All rights reserved. No portion may be copied or reproduced in any manner.